After Automatic Search process is completed, the following message asking for analogue channel search appears on the screen. TV switches to the analogue TV mode:
Select your Language, Country and Text language by using α / β and _ / ‾ buttons. Press OK button to continue. To cancel, press BLUE button.
For more information on this process, see “Install Menu” section.
Everyday Operation
Pressing the TV/DTT button at any time while watch- ing television programmes will switch the TV set be- tween the digital terrestrial television broadcasting and the analogue broadcasting.
Information Banner
•Whenever you change the channel using the P + or P - buttons or the number buttons, TV displays the channel picture along with an information banner at the bottom of the screen. This will remain on the screen for approximately three seconds.
•The information banner can also be displayed by press- ing the 
button at any time while watching the TV. Pressing the 
button again removes the banner.
The information banner gives a number of facts on the channel selected and the programme on it:
•The name of the channel is displayed along with its channel list number and an indication of the strength of the signal received on this tuning channel.
•The current and next programme information are given with the start and finish time.
•The current time information is displayed along with channel name.
Hint
Not all channels broadcast the programme data. If the
name and times of the programme are not available then “No Information Available” is displayed in the information banner.
If the selected channel is locked, you must enter the correct four digit key to view the channel.
ELECTRONICPROGRAMMEGUIDE(EPG)
Some, but not all, channels send information about the cur- rent and next events. Please note that event information is updated automatically. If there is no event information data available for channels, only channel name with “No Infor- mation Available” banner is displayed.
•Press GUIDE button to view the EPG menu.
•Press 
or 
buttons to navigate in Channels or Programmes.
•Press 
or 
buttons to navigate through the channel and programme list.
•In EPG Menu, you can easily see the extended help
information by pressing the 
button and by pressing this button again you can close this window.
•In the EPG Menu all channels are displayed. The current channel is highlighted when you enter the EPG menu.
•Use 
or 
buttons to change the channel. Also press RED or GREEN buttons to make page up/down scroll for the channels. And press OK button to watch the highlighted channel.
•If you highlight an event, short event description, extended event description, start and finish time of the event are displayed on the screen.
•If you press OK button when a next event is high- lighted, a reminder is set for the highlighted programme and a clock icon appears across the highlighted channel line as shown in the following EPG menu figure.
Programme reminders is set to signal that a programme is about to start when you are watching another channel. If you set reminder to a programme,
English - 13 -
Downloaded From