Manual Search:
In Manual Search, the number of the multiplex is entered manually and only that multiplex is searched for the channels. For every valid channel number, signal level, signal quality and network name are shown at the bottom of the screen.
In both manual and auto search any existing channel in the database is not
First Time Installation
The user can use this item to load default settings, which had been loaded to the receiver at the factory.
To install factory settings, highlight “First Time In- stallation” menu item and press OK button, then you will be asked to tings. Selecting “Yes” by pressing OK button while the “Yes” is highlighted and then the existing channel table will be deleted.
After factory settings is loaded, “First Time Instal- lation” menu will be displayed.
The menu which is displayed for language selection
appears on the screen at first. By using or buttons, select the desired language option, and press OK button to activate.
After the language is selected, a message asking for automatic search start appears on the screen.
Highlight “Yes” item by pressing or buttons and press OK button to start installation. After search is completed for digital channels, a message asking search for analogue channels appears on the screen.
Highlight “Yes” item by pressing or buttons and press OK button to searh for analogue channels.The following menu appears on the screen for analogue channel search.
By pressing or button, adjust the Country item and press to highlight Language item. Use or
button to set Language. Use or buttons to select TXT Language and set it by using or buttons. Press OK button to continue.
Configuration
Press button to display the Main Menu and the button twice to highlight Configuration, then press OK
button to display the Configuration menu. Press button to exit the menu.
0DLQ0HQX
The various configuration functions are displayed in a list, along with a
highlighting the corresponding menu line using the
or buttons.
English - 18 -
Downloaded From