Default Zoom
By pressing α / β button, select Default Zoom. You can set Default Zoom to Full, Panoramic, 4:3
or 14:9 Zoom by pressing _ / ‾ button.
Blue Background
By pressing α / βbutton, select Blue Background.
Press _ / ‾ button to set Blue Background as on or off.
Menu Background
By pressing α / β button, select Menu Back- ground. You can change menu background to Trans- lucent or Opaque by pressing _ / ‾ button.
Menu Timeout
By pressing α / β button, select Menu Timeout. Press _ / ‾ button to change menu timeout to 15 sec, 30 sec or 60 sec.
Teletext Language
By pressing α / β button, select Teletext Lan- guage. Press _ / ‾ button to change Teletext Lan- guage to West, East, Turk/Gre, Cyrillic or Arabic.
Install Menu
Program
By pressing α / β button, select Program. Press _
/‾ button to select the program number. You can also enter a number via digit buttons on the remote control. There are 100 program storage between 0 and 99.
Band
Band can be selected either C or S by press _ / ‾ button.
Channel
Channel can be changed by _ / ‾ button or Digit But- tons.
Colour System
By pressing α / β button, select Colour System. Press _ / ‾ button to change the colour system to PAL, SECAM or AUTO.
If Sound System is set to I, SECAM is not available for the Colour System.
NOTE: In EXT mode, you can choose NTSC 3.58, NTSC 4.43 or PAL60 as well.
Sound System
By pressing α / β button, select Sound System. Press _ / ‾ button to change the sound system to BG, I, DK, L or LP.
Fine Tune
By pressing α / β button, select Fine Tune. Press
_/ ‾ button to adjust the tuning.
Search
By pressing α / β button, select Search. Press _ /
‾button to start program searching.You can also enter the desired frequency via digit buttons when search item is highlighted.
VCR
This item can be seen in all modes except YPbPr, HDMI and PC.
If you want to watch a VCR source from one of these modes, then it will be better to set VCR mode “on”. For this, while the cursor is on this item press the _ /
‾buttons to set it On.
If you want to watch a DVD , then you must set this item Off.
Store Program
By pressing α / β button, select Store Program. Press 
or OK button to store the adjustments. “Pro- gram Stored” will be displayed on the screen.
Program Menu
English - 24 -
Downloaded From