Introduction, Package Contents | NETGEAR ANT24D18 specification

Introduction

Thank you for purchasing the NETGEAR ANT24D18 antenna. This Installation Guide provides installing instructions and guidelines for using the NETGEAR 18 dBi Patch Panel Directional Antenna.

Package Contents

Installation Guide, Warranty and	18 dBi Patch Panel Directional	Lightning
	Antenna ANT24D18
Support information card		arrestor

Screws, bolts, washers, and plastic anchors

2-meter cable

Reverse N/SMA adapter

2 brackets for adjustable positioning, 2 wall brackets,

2 indented brackets and 2 U-bolts

The package should contain the following items:

•NETGEAR Indoor/Outdoor 18 dBi 2.4 ~ 2.5 GHz Patch Panel Directional Antenna ANT24D18

•2-meter low loss antenna cable to connect the antenna to a lightning arrestor

•Lightning Arrestor

Note: a ground cable is not included but required for outdoor installation. The grounding

cable must be equivalent or better than: AWG 10, UL 1015, Stranded, 600 V, 105°C, green or green/yellow insulation, 2 clip of 5.5 mm inner diameter cramped at both ends, cable no longer than 5 meters.

•Reverse N/SMA Adapter