Panasonic SC-BTT270 manual Connect the cables, Turn on the main unit, Other connection

Connect the cables					It is possible to play back 3D videos and 3D still pictures by connecting this unit with a 3D compatible TV.
					For detailed information, refer to the operating instructions.
3 Connect the cables by colour or by the numbers indicated in the illustration
to the appropriate terminals on the rear panel of the unit.							Adhesive tape
PURPLE	GREEN	RED	WHITE	GREY	BLUE	FM indoor antenna
						(supplied)
					

Other connection

Broadband Network Connections

By connecting this unit to the network, you can optimise the internet features of this unit.

• Use category 5 or above straight LAN cables (STP) when connecting to peripheral devices.

• When using the wireless LAN function*2, the LAN cable that connected to the main unit is not necessary.

*2 South East Asia (For Malaysia, Thailand, Singapore and Hong Kong) only

e.g., For South East Asia

Main unit

6	5	2	1	4	3
3Ω	3Ω	R 3Ω L		R 3Ω L		FM ANT	AUX
SUBWOOFER CENTER FRONT SURROUND						75Ω

HDMI cable (not supplied)

(Recommended for highest quality picture)

HDMI (ARC)

HDMI	If the HDMI terminal is labeled “HDMI (ARC)”, you can enjoy TV sound and
	pictures with a single HDMI cable.

If the HDMI terminal is not labeled “HDMI (ARC)”, an “Audio cable”

or “Optical digital audio cable” is required to listen to sound from the TV.

Audio connection

For best quality audio, use the HDMI cable (with an ARC compatible TV) or an optical digital audio cable.

LAN

Main unit

LAN cable (not supplied)

TV

OPTICAL

OUT

VIDEO IN

L

AUDIO OUT

R

Optical digital audio cable (not supplied)

Video cable*1 (supplied)

Audio cable (not supplied)

*1 Make sure that the video cable connection is made to view photos/videos from the iPod/iPhone.

If your TV does not support the above, use the audio cable.

Broadband router, etc.

Internet

4 Turn on the main unit

Connect the AC mains lead
1 Connect the AC mains lead to the main unit before connecting
to the household mains socket.
Before connecting the AC	Main unit
mains lead;

Set the voltage at the bottom of the main unit.

2 Turn on the TV

Turn on your TV and select the appropriate video input mode (e.g., VIDEO 1, AV 1, HDMI, etc.) to suit the connections to this unit.

3 Turn on the main unit

Press [ ] to turn on the main unit.

4 The Easy setup starts

The on screen display will guide you through the steps.

Easy setup

Would you like to start easy setup?

110 127V 220 240V

VOLT ADJ

Use a flat-head screwdriver to move the voltage selector to the appropriate position for the area in which this system is used.

AC Voltage selector

AC mains lead (supplied)

To a household mains socket

Installing batteries in the	
remote control	
R6/LR6, AA

Yes No

OK

RETURN

Press [, ] to select [Yes] and press [OK].