Panasonic DMP-BDT350, DMP-BDT300 operating instructions Picture

Page 35

Picture

The images from this unit do not appear on the television.

Picture is distorted.

¾ An incorrect resolution is selected in “Component Video Resolution” or “HDMI Resolution”. Reset the setting as follows:

1 While the unit is on, press and hold [OK], [B] and [Y] on the remote control at the same time for more than

5 seconds.

– “00 RET” is displayed on the unit’s display.

2Repeatedly press [1] (right) on the remote control or [POWER Í/I] on the unit until “04 PRG” is displayed on the unit's display.

3Press and hold [OK] on the remote control or [< OPEN/ CLOSE] on the unit for at least 3 seconds.

Set the item again. (> 32)

When Dolby Digital Plus, Dolby TrueHD, and DTS-HD audio are not output in bitstream, select “Yes” in “Restore Default Settings” and make proper settings. (> 33)

Video is not output.

¾Set the “High Clarity Sound” in the Playback menu to “Off” to use the COMPONENT VIDEO OUT terminal or the VIDEO OUT terminal. (> 29)

¾Video from the HDMI SUB AV OUT terminal is not output when the “HDMI(SUB) Output Mode” is set to “V.OFF”. (> 32)

Video is not output in high-definition.

¾Confirm that the “HDMI Video Mode”, “HDMI Resolution”, and “Component Video Resolution” in the Setup menu are set properly. (> 32)

3D video is not output.

¾Is there a non-3D compatible amplifier/receiver connected between this unit and a TV? (> 10)

¾If there is a non-3D compatible amplifier/receiver connected to the HDMI SUB AV OUT terminal, set the “HDMI(SUB) Output Mode” to “V.OFF”. (> 10)

¾Are the settings on this unit and the TV correct? (> 23)

¾Is the amplifier/receiver connected to between this unit and TV on?

No subtitles.

¾When progressive output is on, closed captions/subtitles cannot be displayed.

The subtitles overlap closed captions recorded on discs.

¾Turn off the subtitles or turn off the closed caption setting on the TV. (> 28)

A black band is displayed around the edge of the screen.

The aspect ratio of the screen is abnormal.

¾Confirm the “TV Aspect” is set properly. (> 32)

¾Adjust the aspect setting on the television.

(Adjustment using “Screen Aspect” (> 20) on the unit is also possible)

Audio

Cannot switch audio.

¾When connecting an amplifier/receiver using a COAXIAL/ OPTICAL terminal or an HDMI terminal, you cannot switch the audio if “Digital Audio Output” is set to “Bitstream”. Set “Digital Audio Output” to “PCM” or connect using AUDIO OUT terminal. (> 11, 31)

Cannot hear the desired audio type.

¾Check the connections and the “Digital Audio Output” settings. (> 31)

¾When the unit is connected to an amplifier/receiver with the AUDIO OUT terminal, set “Analog Audio Output”. (> 32)

¾To output audio from a device connected with an HDMI cable, set “HDMI Audio Output” to “On” in the Setup menu. (> 32)

¾When connecting this unit to a TV via an HDMI MAIN AV OUT and to an amplifier/receiver via an HDMI SUB AV OUT, set “HDMI(SUB) Output Mode” to “V.OFF”. (> 10)

Reference

35

VQT2J87 (ENG)

Image 35
Contents If you have any questions contact Model No. DMP-BDT300Following Applies only in the U.S.A. FCC Note Important Safety InstructionsTable of contents Unit and media care AccessoryUsing the remote control Front panel Power button Power Í/IControl reference guide Playable discs/Cards/USB devices Type Logo examples Type detail Playable contentsBD-Video Discs that cannot be played in this unitRegion management information FinalizeHighest Quality Video Connecting to a TVStandard Quality Video Audio/Video Component CableMulti channel speakers Amplifier/receiver Connecting to an amplifier/receiverDigital Audio Hdmi cable Multi channel speakers Amplifier/receiverCable connections Analog AudioConnect Audio cables to Terminals corresponding To the speakers you have ConnectedServer Connecting to a broadband networkLAN Cable Broadband router, etc Dlna Certified mediaFollowing Applies in the U.S.A. and Canada Precautions of Wireless LAN AdaptorPress Í Power Connecting to an AC powerSetting Easy SettingAccess Point Connection Setting Network Easy SettingSelect Wired or Wireless and press OK For wireless LAN connectionDisplay Network Easy Setting Connection CheckConnection to access point LAN IP address setting Fail Network Easy Setting Internet Connection CheckFor other Panasonic products Reprogramming the remote controlFirmware updates Functions menu To switch drivesInserting or removing media Playing video contents Press SUB Menu Select an item, then press OK Useful functionsInsert the disc Deleting data/Formatting SD cardsPress PIP Connect to the networkSet Subtitle in Disc Cancel the unit’s registrationRegarding DivX Displaying subtitle textEnjoying 3D video Press 3, 4, 2, 1 to select the album and press OK Playing still picturesTo show the picture properties Insert a disc, SD card or USB devicePlaying a track in another folder Playing musicEnjoying Viera Casttm Status Dlna feature BDT350Useful functions for when playing back pictures While contents list is displayedViera LinkTM is a new name for EZ SyncTM Easy control only with Viera remote controlLinked operations with TV Viera LinkTM Hdavi ControlTMDisc Playback menuAudio PlayVideo Setup menu Display TV / Device Connection Others NetworkCannot eject disc Troubleshooting guideGeneral operation Picture Playback On the unit’s display MessagesOn the television Hdmi AV OUT/DIGITAL Audio OUT Coaxial/Optical Audio InformationAbout audio from audio output terminals Stereo*5 Recommended audio output settingPress Setup Audio Set each item For details of the each item, refer toSubtitles text file of DivX About MP3/JPEG/DivX/ AVCHD/MPEG2 filesDivX Structure of folders that can be played in this unit Supplemental information Specifications Contact Information cdrequest@am-linux.jp Glossary As of November Product or Part Name Parts LaborFor Product Operation ASSISTANCE, please contact Limited Warranty Only for CanadaLink ServicentresTM locator under Customer support Reproducción básica Referencia rápida enConexiones básicas Local storage M MPEG2 MP3 Network AC Power Connection Angle AudioOff Timer On-screen Language Picture-in-picture Playback Index