Panasonic DMP-BD901, DMP-BD91, DMP-BD81 owner manual Picture, Playback

Page 28

The TV screen turns black.

¾When “24p Output” is set to “On”, HDMI authentication takes place and a black screen is displayed.

This unit does not recognize the USB connection correctly.

¾Disconnect and re-connect the USB cable. If it still does not recognize the connection, turn this unit off and on again.

¾USB devices may not be recognized by this unit when connected using the following :

a USB hub

a USB extension cable other than the supplied with the Wireless LAN Adaptor DY-WL5 (optional)

¾If you connect USB HDD to this unit, use the USB cable that is supplied with the HDD.

Picture

The images from this unit do not appear on the TV.

Picture is distorted.

¾An incorrect resolution is selected in “HDMI Resolution”. Reset the setting as follows:

1Turn the unit on.

2Press and hold [OK], the yellow button and the blue button on the remote control at the same time for more than 5 seconds.

– POWER LED starts to flash.

3Press [8] and the blue button on the remote control at the same time for more than

5 seconds.

Set the item again. (> 22)

When Dolby Digital Plus, Dolby TrueHD, and DTS-HD®audio are not output properly, select “Yes” in “Restore Default Settings” (> 26) and make proper settings.

Video is not output in high-definition.

¾Confirm that “HDMI Resolution” in the Setup menu is set properly. (> 22)

No subtitles.

¾When progressive output is on, closed captions/subtitles cannot be displayed.

The subtitles overlap closed captions recorded on discs.

¾Turn off the subtitles or the closed captions. (> 20, 23)

Closed captions are not displayed.

¾Confirm that the source content supports CC.

¾Confirm the “Closed Caption Display” is set to “On”. (> 21, 23)

¾Change the “Closed Caption Type” setting. (> 21, 23)

¾Confirm the “Analog CC” or “Digital CC” is set properly (> 21, 23).

A black band is displayed around the edge of the screen.

The aspect ratio of the screen is abnormal.

¾Confirm the “TV Aspect” is set properly. (> 25)

¾Adjust the aspect setting on the TV.

Audio

Cannot hear the desired audio type.

¾Check the connections and the “Digital Audio Output” settings. (> 9, 23)

Playback

Disc cannot be played.

¾The disc is dirty. (> 5)

¾The disc is not finalized. (> 7)

¾Confirm the “Mixed Data Disc Option” is set properly. (> 25)

Still pictures (JPEG) do not play back normally.

¾The images that were edited on the PC, such as Progressive JPEG, etc., may not be played back.

I can’t play back BD-Live.

¾Confirm that this unit is connected to the broadband Internet. (> 10)

¾Connect this unit to the network by a wired connection.

¾Confirm the “BD-Live Internet Access” settings. (> 24)

¾Confirm a USB device is connected to the USB port. (> 13)

28 SQT0108

Image 28
Contents Blu-ray DiscTM Player Following Applies in the U.S.A. and Canada BD901 BD91 Following Applies only in the U.S.A. FCC NotePrecautions UnitTable of contents Accessories Unit and media careContents format Playable mediaTypes of discs that cannot be Played in this unit Region management informationMusic CD USB deviceStandby/on switch Í/I Control reference guideConnecting to a TV Connecting to an amplifier/receiverTo an AC outlet AC power supply cord supplied Hdmi cableWireless LAN connection Connecting to the networkLAN cable connection Settings Easy SettingsEasy Network Setting About the wireless connectionFirmware updates If your wireless network is encryptedInserting or removing media Home menu USBSwitching the user information Multi User ModePersonalizing a new user Playback Operations during playbackEnjoying BD-Live SlideshowShow top menu/pop-up menu Show the status messagesSelect the item and press OK To exit from Network Service ≥ Network connection ≥ Network settingsPress Internet Playing back contents on the Dlna server Home Network featureUsing the Digital Media Controller Automatic input switching Power on link Power off linkOption menu Operation MenuVideo Settings Setup menu VideoLanguage Audio¾ DTS/DTS-HD Network DSTSystem Ratings¾ Hdmi CEC Firmware Update ¾ Automatic Update Check¾ Update Now System InformationTroubleshooting guide Unit does not respond to remote control or unit’s buttonsGeneral operation Cannot eject discPicture PlaybackMessages on the screen Specifications GeneralFile format BD901 BD91Language code list Audio informationSupported format for Dlna Display languages listPage Limited Warranty Limited Warranty Only for Canada Panasonic Canada IncPanasonic BD / DVD Player Panasonic Streaming PlayerSpanish Quick Reference Conexiones básicas Reproducción básicaMulti User Mode Wireless LAN 24pIndex Dlna