Panasonic DMP-BD89, DMP-BD79 owner manual Setup menu, Video, Audio, ¾ DTS/DTS-HD

Page 24

Setup menu

Change the unit’s settings if necessary. The settings remain intact even if you switch the unit to standby. Some items in the Setup menu are common to the Option menu. You can get the same effect with both menus.

About Multi User Mode

: Settings of the items with this indication are saved by the respective users registered in the HOME menu. Please refer to page 16 for details about user registration and switching.

1 While displaying the HOME menu, press [SETTINGS].

Player Settings

Video

Picture Mode

Normal

Picture Adjustment

 

 

 

Audio

HDMI Output

 

Language

Network

Ratings

System

OK

RETURN

2 Select an item and change the settings.

To exit the screen

Press [HOME].

Video

Picture Mode (> 23)

Picture Adjustment (> 23)

HDMI Output

Press [OK] to show the following settings:

¾HDMI Resolution

The items supported by the connected devices are indicated on the screen as “¢”. When any item without “¢” is selected, the images may be distorted.

If “Auto” is selected, the best suited output resolution to the connected TV is automatically selected.

To enjoy high-definition video up-converted to 1080p, you need to connect the unit directly to 1080p compatible HDTV (High Definition TV). If this unit is connected to an HDTV through other equipment, the other equipment must also be 1080p compatible.

¾24p Output

When this unit is connected to a TV supporting 1080/24p output, movies and other material recorded at 24p* are output at 24p.

When playing DVD-Video, set to “On” and then set “24p” in “Video Settings” (> 23) to “On”.

When BD-Video/DVD-Video images other than 24p are played, images are output at 60p.

¾Deep Color Output

This setting is for selecting whether to use Deep Color output when a TV that supports Deep Color is connected.

¾Contents Type Flag

Depending on the playback content, the TV will output adjusting to the optimal method when a TV that supports this function is connected.

*A progressive image recorded at a rate of 24 frames per second (motion-picture film). Many BD-Video movie contents are recorded in 24 frames/second in accordance with the film materials.

Audio

Dialog Enhancer (> 23)

Dynamic Range Compression

You can listen at low volumes but still hear dialog clearly. (Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)

“Auto” is effective only when playing Dolby TrueHD.

Digital Audio Output

Press [OK] to show the following settings:

¾Dolby D/Dolby D +/Dolby TrueHD

¾DTS/DTS-HD

Select the audio signal to output.

Select “PCM”, when the connected equipment cannot decode the respective audio format. This unit decodes the audio format and transmits to the connected equipment.

Not making the proper settings may result in noise.

¾BD-Video Secondary Audio

Select whether or not to mix the primary and secondary audio (including the button click sound). If “Off” is selected, the unit outputs the primary audio only.

24 VQT4V11

Image 24
Contents Blu-ray DiscTM Player Following Applies in the U.S.A. and Canada BD89 Following Applies only in the U.S.A. FCC NotePrecautions UnitTable of contents Accessories Unit and media carePlayable media Discs that cannot be played This unit Region management informationFinalize BD-VideoStandby/on switch Í/I Control reference guideConnecting to a TV AC power supply cord suppliedConnecting to an amplifier/receiver Hdmi cableConnecting to the network Wireless LAN connectionLAN cable connection Settings Easy SettingsEasy Network Setting When your wireless network is encrypted Reprogramming the remote control Firmware updatesTo update the firmware Inserting or removing media Home menuUSB Multi User Mode Switching the userPersonalizing a new user Playback Operations during playbackDisplaying menus and playback information Enjoying BD-LiveSlideshow ≥ Network connection ≥ Network setting Select the item and press OK To exit from Network ServicePress Internet Home Network feature Playing back contents on the Dlna serverUsing the Digital Media Controller Power off link Automatic input switching Power on linkOption menu Operation MenuVideo Settings Audio SettingsSetup menu VideoAudio ¾ DTS/DTS-HDLanguage NetworkDST Ratings System¾ Hdmi CEC LED indicators Remote control and this unit are using different codesInfo LED Info LED state DescriptionMessages Troubleshooting guide General operationCannot eject disc Picture This unit does not recognize the USB connection correctlyVideo is not output in high-definition No subtitlesPlayback Specifications GeneralFile format BD89Language code list Audio informationSupported format for Dlna Display languages listReference Page Limited Warranty One Panasonic Way, Secaucus, New JerseyLimited Warranty Only for Canada Panasonic Canada IncSpanish Quick Reference Conexiones básicas Reproducción básicaIndex DlnaHdmi CEC LAN