Haier L32A9 -AK, L32A9-AKF manual DVD setup, DTV setup, How to connect, How to use

External Equipment Connections

DVD setup

How to connect

1. Connect the DVD video outputs (Y, Pb/Cb, Pr/Cr) to the COMPONENT (Y, Pb/Cb, Pr/Cr) INPUT jacks on the TV and connect the DVD audio outputs to the AUDIO INPUT jacks on the TV, as shown in the figure.

2. If your DVD only has an S-Video output jack, connect this to the S-VIDEO input on the TV and Connect the DVD audio outputs to the AV IN jacks on the TV, as shown in the figure.

NOTE: If your DVD player does not have component video output, use S-Video.

How to use

1. Turn on the DVD player, insert a DVD.

2. Use the S-Video button on the remote control to select S-VIDEO mode.

3. Press Play button on external equipment for program play.

4. Refer to the DVD player's manual for operating instructions.

Pr/Cr	Pb/Cb	Y	L AUDIO R	VIDEO	S-VIDEO	L AUDIO R
			IN	IN	IN		IN

or

DVD

DTV setup

-To watch digitally broadcast programs, purchase and connect a digital set-top box.

How to connect

Use the TV`s COMPONENT (Y, Pb/Cb, Pr/Cr) INPUT jacks, VGA or DVI port for video connections, depending on your set- top box connections available. Then, make the corresponding audio connections.

How to use

1. Turn on the digital set-top box. (Refer to the owner`s manual for the digital set-top box.)

2. Use PC/DVI on the remote control to select PC or DVI (Y, Pb/Cb, Pr/Cr) mode.

3. Press Play button on external equipment for program play.

VGA IN

VGA	AUDIO	Pr/Cr	Pb/Cb	Y	L AUDIO R	DVI IN	AUDIO
					IN

	or		or
RGB-DTV OUTPUT R AUDEO L	Y Pb Pr	R AUDEO	DVI-DTV OUTPUT R AUDEO L

Digital Set-top Box

10