Haier L32A9-AKF, L32A9 -AK manual Default

Adjust menu

In VGA and DVI input mode, H-Position and V-Position can be adjusted to eliminate transverse line interference.

OK Q.VIEW

CH+

VOL- MENU VOL+

CH-

PSMSSM

(Continue)

PC setting

1 Press CH+/- buttons to select RGB, then press VOL- /+ buttons to enter the sub menu.

2 Press CH+/- buttons to select the desired item, press VOL+/- button to adjust.

RGB is opted for adjustment of the numerical value of red, green and blue in VGA/DVI mode.

Display Mode	Normal
Adjust
RGB
Default
Auto Sync.
Color Temperature	Normal
Black Stretch	On
A
B
C

Red	0
Green	0
Blue	0

A

B

C

Default

This is opted for adjustment of parameters to delivery setup in VGA mode.(After the operation, complete will be on the right of the operation)

Repeat step 1 and 2 to set the Default.

NOTE

As the frequency of display differ in PC device you may select the appropriate frequency to obtain desired effect. If the signal of receive is excess, the picture can be not displayed or wrong on the screen.

Auto Sync

This is opted for adjustment of picture location requency and phase parameters in VGA mode.(After the operation, complete will be on the right of the operation)

In VGA , if no signal input, the Auto Sync will be no adjustable.

Repeat step 1 and 2 to set the Auto Sync.

Note

Recommendatory frequency as follow:

Sequence	frequency	H-frequency	V-frequency	Remark
		KHz	Hz
		31.5	60	DOS
		37.88	60	VESA
		48.36	60	VESA

31