∫Downmix
Select the downmix system of
≥Select “Surround encoded”, when the connected equipment supports the virtual surround function.
≥The downmix effect is not available when “Digital Audio Output“ is set to “Bitstream”.
≥The audio will be output in “Stereo” in the following cases:
–AVCHD playback
–Playback of secondary audio (including the button click sound).
∫DTS Neo:6
2ch (2.1ch) audio is expanded to 7ch (7.1ch) before it is output.
≥Audio expansion is enabled when you have selected “PCM” in “Digital Audio Output”.
≥This does not function on Dolby sound.
Language
∫Audio Language
Choose the language for audio.
≥If “Original” is selected, the original language of each disc will be selected.
≥Enter a code (> 34) when you select “Other
¢¢¢¢”.
∫Subtitle Language
Choose the language for the subtitle.
≥If “Auto” is selected and the language selected for “Audio Language” is not available, subtitles of that language will automatically appear if available on that disc.
≥Enter a code (> 34) when you select “Other
¢¢¢¢”.
∫Menu Language
Choose the language for the disc menus.
≥Enter a code (> 34) when you select “Other
¢¢¢¢”.
∫Subtitle Text
Select a suitable item according to the language used for MKV subtitles text.
≥This item is displayed only after playing back a file.
∫
Choose the language for menus and
Network
∫Easy Network Setting (> 12)
∫Network Settings
Perform
¾LAN Connection Mode
Select the LAN connection method.
¾Wireless Settings
This allows the wireless router and connection settings to be set. Current connection settings and connection state can be checked.
Connection Setting
The wireless router connection wizard will be displayed.
Double Speed Mode Setting (2.4GHz) Set the connection speed for a 2.4 GHz wireless format.
≥If you connect using the “Double Speed Mode (40MHz)”, 2 channels use the same frequency band, and there is consequently a greater risk of reception interference. This can cause the connection speed to drop or become unstable.
¾IP Address/DNS Settings
This is for checking the state of the network connection and setting the IP address and
Press [OK] to show the respective setting.
¾Proxy Server Settings
This is for checking the state of connection with the Proxy server and performing settings. Press [OK] to show the respective setting.
¾Network Service Settings (> 19) Press [OK] to show the following settings:
Time Zone
Set the unit’s time to match your location.
≥Some Network Service contents require the time zone to be set. Set the time zone if necessary.
DST
Select “On” when using Daylight Saving time.
Settings
VQT4V11 25