Panasonic DMP-BDT320 operating instructions Playback, Operations during playback, Stop

Playback

1 Insert the media.

Playback starts depending on the media.

2 Select the item to play.

Repeat this procedure if necessary.

Operations during playback

1 Repeatedly press [KEYS] to display the playback control screen.

≥Signal from PAL discs is output as PAL. Signal from NTSC discs is output as “NTSC” or “PAL60”. You can select “NTSC” or “PAL60” in “NTSC Contents Output” for NTSC discs. (> 30)

≥DISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED. Select [∫] from the KEYS screen when you have finished playback to protect the unit’s motor, your television screen and so on.

≥DivX and MKV: Successive play is not possible.

≥It is not possible to play back AVCHD and MPEG2 video which have been dragged and dropped, copied and pasted to the media.

≥To save on electricity, the unit is turned off automatically if there is no button operation for about 30 minutes when not playing back (such as when paused, displaying the menu, displaying still pictures, etc.).

2 Select a key.

See page 10 for the KEYS screen operation.

Following functions may not work depending on the media and contents.

Stop

The stopped position is memorized.
Resume play function
Select [1] (PLAY) to restart from this position.	Playback
≥ The position is cleared if the disc is ejected or
you select [∫] several times to display “STOP”
on the unit’s display.
≥ On BD-Video discs including BD-J, the
resume play function does not work.

VQT3V87 19