Samsung BD-F5700 Configuring Your Network, Connection, Network Settings, Wireless Network

5. Select the desired network, and then press the v button.

	5. Select Connect button, and then press
Network Settings
Please contact your ISP to find out if your IP		the v button. The product detects the
		wired connection, verifies the network
address is static or dynamic. If it is dynamic		connection and then connects to the
- and most are - we recommend using the		network.
Auto procedure for network setup. This is		Wired - Manual
easiest and will work in the majority of cases.	ĞĞ
If it is static, you must use the manual set up	If you have a static IP address or the Automatic

✎✎ NOTE

`` You can get the Network values from your Internet provider.

8. When finished entering all the values,

select OK, and then press the v

button. The player verifies the network

connection and then connects to the

Network Setting

Wireless network setup

iptime23 setup solugen_edu#1

WPS(PBC) Search

You can connect your Blu-ray player to the internet. Please select which wireless network to use.

procedure.	procedure does not work, you'll need to set
Network setup directions start below.	the Network Settings values manually.
	Follow Steps 1 and 2 in Wired Network, and

network.

Wireless Network

m Move " Select ' Return

Configuring Your Network		then follow these steps:
Connection		1.	Select Network Status. The player
Before you begin, contact your ISP to find out			searches for a network, and then
if your IP address is static or dynamic. If it is		2.	displays the connection failed message.
dynamic, and you have a wired or wireless			On the bottom of the screen, select IP
network, we recommend using the Automatic			Settings, and then press the v button.
configuration procedures described below.		3.	The IP Settings screen appears.
If you are connecting to a wired network,			Select the IP Setting field, and then
connect the player to your router using a			press the v button.
LAN cable before you start the configuration		4.	Select Enter manually in the IP Setting
procedure.
If you are connecting to a wireless network,		5.	field, and then press the v button.
disconnect any wired network connection			Select a value to enter (IP Address,
before you begin.			for example), and then press the v
To begin configuring your network connection,			button.
follow these steps:			Use the number keypad on your remote
Wired Network			control to enter the numbers for the
			value. You can also enter numbers using
			the ▲▼ buttons. Use the ◄► buttons
ĞĞ	Wired - Automatic		on the remote control to move from
			entry field to entry field within a value.
1. In the Home screen, select Settings,			When done with one value, press the
	and then press the v button.	6.	v button.
2. Select Network, and then press the v			Press the ▲ or ▼ button to move
	button.		to another value, and then enter the
3. Select Network Settings, and then			numbers for that value following the
			instructions in Step 5.
	press the v button.	7.	Repeat Steps 5 and 6 until you have
4. Select Wired in the Network Settings
			filled in all values.
	screen, and then press the v button.

You can setup a wireless network connection			6. On the Security screen, enter your
in four ways:
-- Wireless Automatic				network's Security Code or Pass
				Phrase.
-- Wireless Manual				Enter numbers directly using the number
-- WPS(PBC)				buttons on your remote control. Enter
-- WPS(PIN)				letters by selecting a letter with an arrow
When you configure the wireless network				button, and then pressing v button.
connection, any wireless network devices			✎✎ NOTE
currently connected through the player				`` To view the password as you enter it, use the
or, if applicable, the player's current wired				arrow buttons to select Show Password on
connection, will be disconnected.				the right side, and then press v button.
ĞĞ	Wireless - Automatic		7. When done, select Done and then press
				the v button. The player verifies the
1. In the Home screen, select Settings,				network connection and then connects
	and then press the v button.			to the network.
2.	Select	, and then press the v	8. When verification is complete, select
	button.Network			OK, and then press the v button.
3. Select Network Settings, and then			✎✎ NOTES
	press the v button.			`` You should be able to find the Security Code or
4. Select Wireless in the Network Settings				Pass Phrase on one of the set up screens you
	screen, and then press the v button.			used to set up your router or modem.
	The player searches for and then			Wireless - Manual
	displays a list of the available networks.		ĞĞ

If you have a static IP address or the Automatic procedure does not work, you'll need to set the Network Settings values manually.

1. Follow the directions in Wireless - Automatic through Step 5.

12