Samsung BDF5700 Network Test, Network Status, BD-Live Internet Connection, Using BD-LIVE

2.	The player searches for a network,	11.	When finished, select Done at the right
	and then displays the connection failed		of the screen, and then press the v
3.	message.		button.
	On the bottom of the screen, select		The player verifies the network
	IP Settings, and then press the v		connection and then connects to the
	button.	12.	network.
4.	The IP Settings screen appears.		After the player verifies the network,
	Select the IP Setting field, and then		select OK, and then press the v
5.	press the v button.		button.
	Select Enter manually in the IP Setting	ĞĞ WPS(PBC)
	field, and then press the v button.	1.	In the Home screen, select Settings,
6.	Select a value to enter (IP Address, for
			and then press the v button.
	example), and then press v button.	2.	Select Network, and then press the v
	Use the number keypad on your remote
	control to enter the numbers for the	3.	button.
	value. You can also enter numbers using		Select Network Settings, and then
	the ▲▼ buttons. Use the ◄► buttons		press the v button.
	on the remote control to move from	4.	Select Wireless in the Network Settings
	entry field to entry field within a value.
	When done with one value, press the	5.	screen, and then press the v button.
7.	v button.		Press the ▲ button on your remote, and
	Press the ▲ or ▼ button to move		then press the ► button to select the
	to another value, and then enter the	6.	WPS(PBC).
	numbers for that value following the		Press the v button on your remote.
8.	instructions in Step 6.		The "Press the PBC button" message
	Repeat Steps 6 and 7 until you have	7.	appears.
	filled in all values.		Press the WPS(PBC) button on your
✎✎ NOTES			router within two minutes. Your player
			automatically acquires all the network
	`` You can get the Network values from your		settings values it needs and connects to
9.	Internet provider.		your network.
	When finished, select OK, and then		The Network Status screen appears.
	press the v button. The Security		The player connects to the network after
10.	Screen appears.		the network connection is verified.
	On the Security screen, enter your	ĞĞ WPS(PIN)
	network's Security Code or Pass	Before you begin, open the router's setup
	Phrase. Enter numbers directly using the	menu on your PC and access the screen with
	number buttons on your remote control.	the WPS PIN entry field.
	Enter letters by selecting a letter with the
	▲▼◄► buttons, and then pressing the	1.	In the Home screen, select Settings,
	v button.		and then press the v button.

2.Select Network, and then press the v button.

3.Select Network Settings, and then press the v button.

4.Select Wireless in the Network Settings screen, and then press the v button. The player searches for and then displays a list of the available networks.

5.Select the desired network, and then press the ► button.

6.Select the WPS(PIN), and then press the v button. The PIN pop-up appears.

7.Enter the PIN into the WPS PIN entry field in the router's Set Up screen and then save the the screen.

✎NOTES✎

`` Contact the manufacturer of the router for instructions explaining how to access the route's Set Up screens or refer to the router's user's manual.

`` For WPS connection, set your wireless router’s security encryption to AES. Setting to WEP security encryption does not support WPS connection.

Network Test

Use this menu item to check whether your network connection is working or not.

Network Status

Use to check whether a connection to a network and the Internet has been established.

BD-Live Internet Connection

Set to allow or prohibit an Internet connection when you use the BD-LIVE service.

• Allow (All) : The Internet connection is allowed for all BD-LIVE contents.

• Allow (Valid Only) : The Internet connection is allowed only for BD-LIVE contents containing a valid certificate.

• Prohibit : No Internet connection is allowed for any BD-LIVE content.

✎✎ NOTES

`` What is a valid certificate?

When the player uses BD-LIVE to send the disc data and a request to the server to certify the disc, the server uses the transmitted data to check if the disc is valid and sends the certificate back to the player.

`` The Internet connection may be restricted while you are using BD-LIVE contents.

Using BD-LIVE™

Once the player is connected to the network, you can enjoy various movie-related service contents using a BD-LIVE compliant disc.

1.Attach a USB memory stick to the USB jack on the front of the player, and then check its remaining memory. The memory device must have at least 1GB of free space to accommodate the BD- LIVE services.

2.Insert a Blu-ray Disc that supports BD- LIVE.

3.Select an item from various BD-LIVE service contents provided by the disc manufacturer.

✎NOTES✎

`` The way you use BD-LIVE and the provided contents may differ, depending on the disc manufacturer.

13