Panasonic BD611 owner manual Resolution Setting

Installation 17

Resolution Setting
	NOTE
The player provides several output resolutions
	• If your TV does not accept the resolution you
for HDMI OUT and COMPONENT VIDEO OUT
jacks. You can change the resolution using	have set on the player, you can set resolution to
[Setup] menu.	480p as follows:
	1. Press Zto open the disc tray.
1. Press HOME ( ).
	2 Press x(STOP) for more than 5 seconds.
2. Use Yto select the [Setup] and press	• Since several factors affect the resolution of
ENTER ( ). The [Setup] menu appears.	video output, see “Video Output Resolution” on
	page 58.
	• When you set the HDMI Resolution, over 720p is
	not outputted to Composit Video.

3.Use vVto select [DISPLAY] option then press Bto move to the second level.

3

Installation

4.Use vVto select the [Resolution] option

then press ENTER () to move to the third level.

5.Use vVto select the desired resolution

then press ENTER () to confirm your selection.

BD551-N.BUSALLP_0487.indd 17 7/19/11 11:41 AM