Installation 21
Wired Network Setup
If there is a DHCP server on the local area network (LAN) via wired connection, this player will automatically be allocated an IP address. After making the physical connection, a small number of home networks may require the player’s network setting to be adjusted. Adjust the [NETWORK] setting as follow.
Preparation
Before setting the wired network, you need to connect the broadband internet to your home network.
1.Select [Connection Setting] option in the [Setup] menu then press ENTER (
).
2.Use vVY to select the IP mode between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP address automatically.
NOTE
If there is no DHCP server on the network and you want to set the IP address manually, select [Static] then set [IP Address], [Subnet Mask], [Gateway] and [DNS Server] using vVY and numerical buttons. If you make a mistake while entering a number, press CLEAR to clear the highlighted part.
3.Select [OK] and press ENTER (
) to apply network settings.
4.The player will ask you to test the network connection. Select [OK] and press ENTER (
) to complete the network connection.
5.If you select [Test] and press ENTER
(
) at step 4 above, the network connection status is displayed on the screen.
You can also test it on the [Connection Status] in the [Setup] menu.
3
Installation
7/19/11 11:42 AM |