4.3.3.1 WPS Settings

TD-W8901N150Mbps Wireless N ADSL2+ Modem Router User Guide

Figure 4-20

4.3.3.1 WPS Settings

¾WPS Settings: WPS can help you to add a new wireless device to an existing network quickly. This section will guide you how to use WPS function.

WPS state: Display the current WPS state.

WPS mode: If the wireless adapter supports Wi-Fi Protected Setup (WPS), you can establish a wireless connection between wireless adapter and Router using either Push Button Configuration (PBC) method or PIN method, please select the one you want.

WPS progress: Show the current WPS progress.

Reset to OOB: Use this button to reset the WPS state to “unconfigured”, so that a new key will be created when using WPS function next time.

1)PBC

If the wireless adapter supports Wi-Fi Protected Setup and the Push Button Configuration (PBC) method, you can add it to the network by PBC with the following two methods. Click PBC, you will see the screen as shown below.

Figure 4-21

Method One:

Step 1: Click Start WPS button in Figure 4-21.

Step 2: Press and hold the WPS button of the adapter directly for 2 or 3 seconds.

Step 3: Wait for a while until the next screen appears. Click Finish to complete the WPS configuration.

36

Page 44
Image 44
TP-Link manual TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide, WPS Settings, 1 PBC, Method One