TP-Link manual TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide

TD-W8901N150Mbps Wireless N ADSL2+ Modem Router User Guide

The WPS Configuration Screen of Wireless Adapter

)Note:

The default PIN code of the Router can be found in its label or the WPS configuration screen as Figure 4-23.

•SSID: Wireless network name shared among all points in a wireless network. The SSID must be identical for all devices in the wireless network. It is case-sensitive and must not exceed 32 characters (use any of the characters on the keyboard). Make sure this setting is the same for all stations in your wireless network. Type the desired SSID in the space provided.

•Authentication Type: Select an authentication type from the drop-down list, which allows you to configure security features of the wireless LAN interface. Options available are: Disabled, WEP-64Bits, WEP-128Bits, WPA-PSK, WPA2-PSK, and WPA-PSK/ WPA2-PSK.

¾WDS Settings: Select On/Off to enable/disable WDS. With this function enabled, the Router can bridge two or more WLANs.

•MAC Address: Enter the MAC Address you wish to bridge in the field.

¾Wireless MAC Address Filter: Wireless access can be filtered by using the MAC addresses of the wireless devices transmitting within your network’s RADIUS.

•Active: If you wish to filter users by MAC Address, select “Activated”, and “Deactived” for don’t.

•Action: To filter wireless users by MAC Address, select “Allow Association” or “Deny Association” the follow Wireless LAN station(s) association.

40