Change channel settings
Reorder channels
NonPublish
After installation, you may want to reorder the channel list to suit your preference.
1.While watching TV, press 
.
2.Select [Channel list], then press OK.
3.In the channel list, press 
.
4.Select [Reorder], then press OK.
5.Select the channel to reorder, move it to the desired location, then press OK.
6.Select [Insert] to insert the channel into the desired location, [Swap] to swap location with another channel or [Cancel] to cancel the reorder.
7.Press OK to activate.
Rename channels
NonPublish
After installation, you may want to rename channels to suit your preference.
1.While watching TV, press 
.
2.Select [Channel list], then press OK.
3.In the channel list, press 
.
4.Select [Rename], then press OK.
5.In the entry screen that appears, press the Navigation buttons or Numeric buttons to edit the name, then press OK.
6.Once complete, press the Navigation buttons to select [Done].
• To clear the entry, select [Clear].
• To cancel, select [Cancel].
7.Press OK to confirm your choice.
8. Press 
to exit.
Hide or unhide channels
NonPublish
Hide channels
Hide channels from the channel list, to prevent unauthorized access.
1.While watching TV, press 
.
2.Select [Channel list], then press OK.
3.In the channel list, select the channel to hide, then press 
.
4.Select [Hide channel], then press OK. The channel is hidden.
Unhide channels
1.While watching TV, press 
.
2.Select [Channel list], then press OK.
3.In the channel list, press 
.
4.Select [Show hidden channels], then press OK. Hidden channels appear in the channel list, but without channel information displayed.
5.Select the channel to unhide, then press
.
6. Select [Unhide channel], then press OK.
Repeat steps 5 and 6 to unhide other channels.
Update channel list
NonPublish
When the TV was switched on for the first time, a full installation of channels was performed.
You can set the TV to add or remove digital channels automatically. You can also manually start the channel update.
Automatic update
To set the TV to update digital TV channels automatically, leave the TV in standby mode. Once a day, the TV updates earlier found channels and stores new channels. Empty channels are removed from the channel list.
If a channel update is performed, a message appears at startup.
If you do not want this message to appear
1.Press 
.
2.Select [Setup] > [Channel settings] >
[Channel installation] > [Channel update message] > [Off], then press OK.
•To disable automatic updates
In the [Channel installation] menu, select [Automatic channel update] > [Off].
Manual update
Update channels yourself at any time using the manual update.
EN 35
English
