Use HDMI ARC
The HDMI 1 connector is HDMI Audio Return Channel (ARC) compliant. Use it to output digital audio to a HDMI Home Theatre System.
English
HDMI ARC allows you to use Philips EasyLink to output TV audio directly to a connected audio device, without the need for an additional digital audio cable.
Be sure that the device is
Enable or disable HDMI ARC
Note: Enabling HDMI ARC automatically adds the device to the home menu.
1.Press 
.
2.Select [Setup] > [TV settings] >
[EasyLink] > [HDMI 1 - ARC] > [On] or [Off].
3. Press OK to activate.
Use a CAM
Insert and activate a CAM
NonPublish
Caution: Be sure to follow the instructions described below. Wrong insertion of a Conditional Access Module (CAM) may damage both the CAM and your TV.
Notes:
•This TV supports CI as well as CI+. CI+ allows service providers to offer premium HD digital programs with a high level of copy protection.
•Refer to the documentation from your service operator on how to insert a smart card into the Conditional Access Module.
1.Switch off the TV.
2.Follow the directions printed on the CAM and insert the CAM into the Common Interface at the side of the TV.
3.Push the CAM in as far as it will go and wait for the CAM to be activated. This may take several minutes. Do not remove the CAM from the slot when in use as digital services will be deactivated.
EN 61
