•The Navigation buttons or Numeric buttons to manually enter the channel frequency.
•The Navigation buttons to select [Search]. Press OK to automatically search for the next channel.
3.When the correct channel frequency is entered, select [Done], then press OK.
4.Select [Store current channel] to store
the fine tuned channel as the current channel number, or select [Store as new channel] to store it as a new channel number.
Install digital channels
You can reposition your antenna to improve the reception. You need to know the correct frequency to tune. For best results, contact the service provider or get a professional installer.
Note: If you are prompted to enter a code, enter '8888'.
1.Press 
.
2.Select [Setup] > [Channel settings] >
[Channel installation] > [Digital: Reception test] > [Search], then press OK.
3. Press the Numeric buttons to enter the channel frequency.
4.Select [Search], then press OK.
5.When the correct channel is located, select [Store], then press OK.
6.Press 
to exit.
Notes
•If the reception is poor, reposition your antenna and repeat the procedure.
•If you receive the channel with
In [Symbol rate mode], select [Automatic] unless your cable provider supplies you with a specific symbol rate value.
Fine tune analog channels
If the reception of an analog TV channel is poor, try fine tuning the TV channel.
Note: If you are prompted to enter a code, enter '8888'.
1.Press 
.
2.Select [Setup] > [Channel settings] >
[Channel installation] > [Analogue: Manual installation] > [Fine tune], and then press OK.
3.Press 
or 
to fine tune the channel.
4.When the correct channel frequency is
selected, select [Done], and then press OK.
5.Select [Store current channel] to store
the fine tuned channel under the current channel, or select [Store as new channel] to store under a new channel number.
Change language settings
Audio, subtitle, teletext languages
NonPublish
Digital TV channels may stream several audio, subtitle and teletext languages with a broadcast. Set preferred languages when multiple languages are available.
1.Press 
.
2.Select [Setup] > [Channel settings] or
[Satellite settings] > [Language].
3.Select one of the following settings, then press OK:
•[Primary audio] / [Secondary audio]: Selects the available audio language for digital channels.
•[Primary subtitles] / [Secondary subtitles]: Selects the available subtitle language for digital channels.
•[Primary Text] / [Secondary Text]: Selects the available teletext for digital channels.
•[Hearing impaired]: Enables or disables hearing impaired subtitles.
•[Visually impaired] (UK only): Selects the device for audio output.
EN 37
English
