Philips 32PFL76X5H Use Scenea, Listen to digital radio, Activate Scenea, Set a picture as Scenea

Watch video

Press the Navigation buttons to select a video file, then press OK.

View slideshow

Press the Navigation buttons to select a picture, then press OK.

•To pause or stop playback, press OK again.

•To jump to the previous or next file, press or .

•Press to exit content browser.

Press to access or exit the following settings:

•[Show info]: Displays the file information.

•[Stop]: Stops slideshow.

•[Rotate]: Rotates the file.

•[Repeat]: Repeats the slideshow.

•[Play once]: Plays the file once.

•[Shuffle off] / [Shuffle on]: Enables or disables random display of pictures in the slideshow.

•[Slideshow speed]: Sets the display time for each picture in the slideshow.

•[Slideshow transition]: Sets the transition from one picture to the next.

•[Set as Scenea]: Sets the selected picture as wallpaper on TV.

Listen to music

Press the Navigation buttons to select a music track, then press OK.

•Press / to fast rewind or fast forward a track.

•Press to exit content browser.

Press to access or exit the following settings:

•[Stop]: Stops audio playback.

•[Repeat]: Repeats a song or an album.

•[Play once] Plays the file once.

•[Shuffle on] / [Shuffle off]: Enables or disables random play of songs.

•Press or to rewind or fast forward a file.

•Press to exit the content browser.

During video playback, press to access the following settings:

•[Stop]: Stops playback.

•[Repeat]: Repeats a video.

•[Shuffle on] / [Shuffle off]: Enables or disables random play of videos.

Listen to digital radio

NonPublish

If digital broadcasting is available, digital radio channels are installed automatically during installation.

1.While watching TV, press .

2.Select [Channel list:], then press OK.

3.In the channel list, press .

4.Select [Select list] > [Radio], then press

OK.

5. Select a radio channel, then press OK.

Use Scenea

Activate Scenea

NonPublish

You can use Scenea to display a picture as wallpaper on your TV. Make sure that the location of your TV is set to [Home] mode.

1.Press .

2.Select [Scenea] , then press OK.

The default or pre-loaded picture is displayed.

Note: If the sleeptimer is off, the wallpaper is displayed for 240 minutes. Otherwise, it is displayed for the duration of the sleeptimer. For more information on the sleeptimer, see Use more of your TV > Use timers and locks > Sleeptimer (Page 28).

Set a picture as Scenea

NonPublish

Note: The file size of the picture must not be more than 1MB.

1.Connect the USB storage device to the TV.

2.Press .

3.Select [Browse USB], then press OK.

4.Select a picture, then press .

5.Select [Set as Scenea], then press OK.

6.Select [Yes], then press OK.

7.Press any key to exit Scenea.

EN 31

English