Samsung BD-F5100, BDF5100 Media Play, Contact Samsung, Terms of Service Agreement, Reset, Disc

14

By USB		1. Select Auto Upgrade Notification, and
To upgrade by USB, follow these steps:		2.	then press the v button.
			Use the ▲▼ buttons to select On, and
1.	Visit www.samsung.com/bluraysupport.		then press the v button.
2. Download the latest USB software		If there is a new software version available,
	upgrade zip archive to your computer.	the player notifies you with a popup message.
3. Unzip the zip archive to your computer.		1. To upgrade the firmware, select Yes
	You should have a single RUF file with		in the Pop-up. The player turns off
	the same name as the zip file.		automatically, then restarts, and begins
4. Copy the RUF file to a USB flash drive.			the download. (Never turn the player on
		2.	or off manually during an upgrade.)
5. Make sure there is no disc in the player,			The update progress popup appears.
	and then insert the USB flash drive into	3.	When the update is complete, the player
	the USB port of the player.	4.	turns off again automatically.
6. In the player’s menu, go to Settings >			Press the POWER button to turn on the
7.	Support > Software Upgrade.		player.
	Select By USB.	✎	NOTES
✎✎ NOTES			✎ `` The update is complete when the player turns
	`` No disc should be in the product when you		off after restarting. Press the POWER button to
	upgrade the software using the USB Host jack.		turn on the updated player for your use.
			`` Never turn the player off or on manually during
	`` When the software upgrade is done, check the
			the update process.
	software details in the software Upgrade menu.		`` Samsung Electronics takes no legal
	`` Do not turn off the player during the software		responsibility for player malfunction caused by
	upgrade. It may cause the player to malfunction.		an unstable Internet connection or consumer
	`` Software upgrades using the USB Host jack		negligence during software upgrade.
	must be performed with a USB flash memory	Contact Samsung
	stick only.
Auto Upgrade Notification		Provides contact information for assistance
		with your player.
If you have connected the player to your		Terms of Service Agreement
network, and then set Auto Upgrade
Notification on, the player automatically		Lets you view the general disclaimer regarding
notifies you when a new software version is
		third party contents and services.
available for the player.
To set Auto Upgrade Notification on, follow		Reset
these steps:

Returns all settings to their factory defaults except for the network settings.

Media Play
Playing a Commercially Recorded
	Disc			Videos		Photos	Music	Settings
1.	Press the 8 button to open the disc
2.	tray.				No Disc
	Place a disc gently into the disc tray				123
3.	with the disc's label facing up.			123	a	ix	Pandora	YouTube
	Press the 8 button to close the disc				a Change Device		c Safely Remove USB d View Devices " Enter
				6. Press the ◄► buttons to select Videos,
	tray. Playback starts automatically.
				Music, or Photos, and then press the
	Playing Files on a USB Device			v button. Go to Step 7.
				5-1. Press the ◄► buttons to select USB,
You can play multimedia files located on a				then press the v button.
USB storage device.
1.	Move to the Home menu.				123		a	Settings
2.	In Stop mode, connect the USB storage
	device to the USB port on the front
	panel of the player.
	The message "Do you want to access
3.	the device?" is displayed.					Netflix	Pandora	YouTube
	Press the ◄► button to select Yes, and			123				d Home " Enter
4.	then press the v button.			6-1. Press the ▲▼ buttons to select Videos,
	If you have a disc in the Blu-ray player,
				Music or Photos, and then press the
	press the RED (A) or BLUE (D) button.			v	button.
	If you do not, go to Step 6.
	If you pressed the RED (A) button, go to			7. A screen appears listing the contents
	Step 5.			of the device. Depending on how the
	If you pressed the BLUE (D) button, go			contents are arranged, you will see
	to Step 5-1.			either folders, individual files, or both.
5.	Press the ▲▼ buttons to select	USB	,	8. If necessary, use the ▲▼◄►buttons to
	and then press the v button.			select a folder, and then press the v
				button.