Remote Control
Tour of the Remote Control
Connections
Connecting to a TV
Turn the player on and off.
Press to open and close the disc tray.
Press the number buttons to operate options.
Use to enter the disc menu.
Press to skip backwards or forwards.
Press to stop a disc.
Press to play a disc.
Use to access various audio functions on a disc
Press to use the Tools menu.
Use to select menu items and change menu values.
Return to the previous menu. These buttons are used both for menus on the player and also several
Press to use the bonusview function.
Allows you to repeat
BONUS | REPEAT REPEAT | FULL |
VIEW | SCREEN |
Turn the TV on and off.
After setup, allows you to set the input source on your TV.
TV volume adjustment.
Use to enter the popup menu/title menu.
Press to search a disc backwards or
forwards.
Press to pause a disc.
Press to move to the Home menu.
Press to switch the
Use to display the playback information when playing a
Press to exit the menu.
Press to see the full screen on a TV. During
Allows you to repeat a title, chapter, track, or disc.
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN jack on your TV.
Audio
Video
✎✎ NOTES
■■ | If you use an |
| the Digital Audio Out on the player to an audio system to hear audio. |
■■ | An HDMI cable outputs digital video and audio, so you don't need to connect an audio cable. |
■■ | Depending on your TV, certain HDMI output resolutions may not work. Please refer to the |
Installing batteries
✎✎ NOTES
■■If the remote does not operate properly:
●●Check the polarity
●●Check if the batteries are drained.
●●Check if the remote sensor is blocked by obstacles.
●●Check if there is any fluorescent lighting nearby.
!! CAUTION
■■Dispose of batteries according to local environmental regulations. Do not put them in the household trash.
■■Do not dispose of batteries in a fire.
■■Do not short circuit, disassemble or overheat the batteries.
■■Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
| user manual of your TV. |
■■ | When you connect the player to your TV using the HDMI cable or to a new TV, and then |
| turn it on for the first time, the player automatically sets the HDMI output resolution to the |
| highest supported by the TV. |
■■ | A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Color to Off in the menu. |
■■ | To view video in the HDMI 720p, 1080i, or 1080p output mode, you must use a High |
| speed HDMI cable. |
■■ | HDMI outputs only a pure digital signal to the TV. |
| If your TV does not support HDCP |
| noise appears on the screen. |
7