Settings
✎✎ NOTES
■■ If you have no network, select SKIP by |
pressing the BLUE (D) button, and then |
in the screen saver mode for more than 25 minutes, the power will automatically turn off.
The Initial Settings Procedure
●●The Home screen will not appear if you do not configure the initial settings.
●●The OSD (On Screen Display) may change in this player after you upgrade the software version.
●●The access steps may differ depending on the menu you selected.
●●After the initial settings process is complete, you can then operate the panel buttons and remote control.
After you have connected the player to your TV, turn on the TV and player. When you turn on the player the first time, the player's Initial Settings screen appears on the TV. The Initial Setting procedure lets you set the On Screen Display (OSD) and menu languages, the aspect ratio (screen size), the network type, and connect the player to your network.
To run the Initial Settings procedure, follow these steps :
1.Plug in the
Initial Settings I
Select a language for the
Hrvatski
Dansk
English
> Move " Select
2.Select the desired language, and then
press the v button. The Start screen appears.
Initial Settings
TV Aspect and Network will be set.
Each setting may be changed later under "Settings"
Start
a Previous " Select
3.Press the v button. The TV Aspect screen appears.
4.On the TV Aspect screen, select the desired TV Aspect Ratio, and then press
the v button. The Network screen appears.
✎✎ NOTES
■■An explanation of each Aspect Ratio appears on the screen. Highlight each choise to see each explanation. If you have an HDTV, we suggest you choose 16:9 original.
5.If you have connected a LAN cable to the
Initial Settings I Network - Wired
Choose the method to configure Internet Protocol (IP). Please make sure that the Ethernet cable is connected.
Auto : Configure IP automatically
Auto Manual
| go to Step 7. |
6. | After the player verifies the network, |
| press the v button. |
7. | The Initial Settings Complete window |
| appears and remains on the screen for a few |
| moments. Then, the Home screen appears. |
✎✎ NOTES
■■ | The Home screen will not appear |
| if you do not configure the initial |
| settings except as noted below. |
■■ | If you press the BLUE (D) button |
| during network setup, you can access |
| the Home screen even if the network |
| setup is not completed yet. |
■■ | When you return to the Home screen, |
| the full screen mode is cancelled |
| automatically. |
■■ | If you want to display the Initial |
| Setting screen again to make changes, |
| press the ■ button on the front panel |
| of the player for more than 5 seconds |
| with no disc inserted. This resets the |
| player to its default settings. |
■■ | After the initial settings process is |
| complete, you can operate the HDMI- |
| CEC function. |
■■ | If you want to use the |
| |
| in the initial set up process, please |
| follow the instructions below. |
| 1) Connect the player to an |
| |
| Samsung TV using HDMI Cable. |
| 2) Set the |
| to On in both the TV and the player. |
| 3) Set the TV to the Initial Settings |
| Procedure. |
■■ | If you leave the player in the stop |
| mode for more than 5 minutes |
| without using it, a screen saver will |
Menu Navigation
1
3
2
4
1 | HOME Button : Press to move to |
the Home menu. | |
|
|
2 | RETURN Button : Return to the |
previous menu. | |
|
|
| v (Enter) / DIRECTION Button : |
| Move the cursor or select an item. |
3 | Activate the currently selected |
| item. |
| Confirm a setting. |
|
|
4 | EXIT Button : Press to exit the |
current menu. | |
|
|
●● Home Menu
5 |
|
|
|
|
| 1 |
Play Disc |
| Photos |
|
| Videos | Music |
6 |
|
|
|
|
| 2 |
|
|
|
|
|
| |
Empty disc tray |
|
|
|
|
| |
7 |
|
|
|
|
| 3 |
App 1 App 2 | App 3 | App 4 | App 5 | More | Change Device | Settings |
8 |
|
|
|
|
| 4 |
a Previous d Skip ?\ Move " Select
appear on your TV. If the player is left |
9