Samsung BD-E5700/ZA Networks and the Internet, Configuring Your Network Connection, Wpspbc

Networks and the Internet

When you connect this player to a network, you can use network based applications and functions such as Smart Hub and BD-LIVE, and upgrade the player's software through the network connection. For more information about accessing and using Internet services, see the Network Services chapter of this manual on pages 23~25. Instructions for configuring the network connection start below.

Configuring Your Network

Connection

Before you begin, contact your ISP to find out if your IP address is static or dynamic. If it is dynamic, and you have a wired or wireless network, we recommend using the Automatic configuration procedures described below.

If you are connecting to a wired network, connect the player to your router using a LAN cable before you start the configuration procedure.

If you are connecting to a wireless network, disconnect any wired network connection before you begin.

To begin configuring your network connection, follow these steps:

1.In the Home menu, select Settings, and then press the v button.

2.Select Network, and then press the v button.

3. Select Network Settings, and then				Settings		Network Settings		4. On the Support tab, click the Details
	press the v button.			Display		MAC Address	XX:XX:XX:XX:XX:XX	button.
	The Network Settings screen appears.			Audio		IP Address	0.0.0.0	The Network settings are displayed.
				Network		Subnet Mask	0.0.0.0	• Windows 7
						Gateway	0.0.0.0
	Settings			System		DNS Server	0.0.0.0
				LanguageCannot connect to Network. Try the following.				1. Click the Network icon on the bottom
	Display		Network Settings	- Check if IP is set correctly in 'IP Settings'.
				Security- Contact your Internet Service Provider for more information.
	Audio	Select a network connection type.		General	IP Settings	Retry	OK	right of the Windows desktop.
	Network	Wired		Support				2. In the pop-up menu, click Network and
	System	Wireless			a Previous <Move "Enter 'Return
	Language	(General)	Connect to the network using LAN cable. Please make
	Security	WPS(PBC)	sure that the LAN cable is connected.					Sharing Center.
	General			2. Select IP Settings on the bottom of the				3. On the dialog that appears, click the
	Support		>Move "Enter 'Return
								Local Area Connection or Wireless
				screen, and press the v button.				Network Connection depending on your
				The IP Settings screen appears.				network connection.
Wired Network				3. Select the IP Mode field, and then set it				4. On the Support tab, click the Details
				to Manual.				button.
ĞĞ	Wired - Automatic			4. Use the number keypad on your remote				The Network settings are displayed.
				to enter the Network values. Use the				NOTE
To setup, follow steps 1 to 3 in "Configuring				▲▼◄► buttons on the remote to move
Your Network Connection" on page 17.				from entry field to entry field.				\\ Depending on your Windows version, the
1. Select Wired in the Network Settings				5. When done, highlight OK, and then				information may differ.
	screen, and then press the v button.			press the v button. The Network				Wireless Network
	The Network Status screen appears.			Status screen appears. The player
	The player verifies the network			verifies the network connection and then				You can setup a wireless network connection
	connection and then connects to the			connects to the network.				in three ways:
	network.			< Getting the IP Settings values >				-- Wireless Automatic
ĞĞ Wired - Manual
				You can view your Network Settings values				-- Wireless Manual
If you have a static IP address or the				on most Windows computers. To view the				-- WPS(PBC)
								When you configure the wireless network
Automatic procedure does not work, you’ll				Network Settings values, follow these steps:
need to set the Network Settings values				• Windows XP				connection, any wireless network devices
								currently connected through the player
manually.
				1. Right click the Network icon on the				or, if applicable, the player's current wired
1. Select Wired in the Network Settings
				bottom right of the Windows desktop.				connection, will be disconnected.
	screen, and then press the v button.
	The Network Status screen appears.			2. In the pop-up menu, click Status.
	The player attempts to verify the network			3. On the dialog that appears, click the
	connection and fails.			Support tab.

04 Settings

English 17