Pioneer BDP-LX08 Picture is stretched Is the TV’s aspect ratio properly set?, Or amplifier

Page 52

07

Problem

Check

Remedy

Picture is stretched.

Is the TV’s aspect ratio properly set?

Read the TV’s operating instructions and set the TV’s aspect

Aspect ratio cannot be

 

ratio properly.

switched.

Is 4:3 Video Out properly set?

• Set 4:3 Video Out properly (page 41).

 

 

• When video signals with a resolution of 1080/50i, 1080/50p,

 

 

720/50p, 1080/24p, 1080/60i, 1080/60p or 720/60p are being

 

 

output from the HDMI OUT terminal or the COMPONENT

 

 

VIDEO output terminals, they may be output with an aspect

 

 

ratio of 16:9 even if TV Aspect Ratio is set to 4:3 (Standard)

 

 

(page 24).

 

 

 

Sound and picture are not

Is Output Terminal Priority properly set?

Set Output Terminal Priority properly (pages 20 and 49).

synchronized.

 

 

Picture is disturbed during playback.

Picture is dark.

No picture is displayed or picture is not output in high definition when playing BDs.

•This player supports Macrovision analog copy protection technology. With some TVs (such as with built-in video deck), the picture will not be displayed properly when the copy protected DVD title is played. This is not a malfunction.

•If the player and TV are connected via a DVD recorder/video deck, etc., the picture will not be displayed properly due to analog copy protection. Connect the player and TV directly.

With some content protected discs, it may not be possible to output the video signals from the VIDEO output terminals, the S-VIDEOoutput terminal or the COMPONENT VIDEO output terminals. In this case, connect using an HDMI cable (page 14).

52

No sound is output.

Is the disc played back in slow motion?

No sound is output during slow motion play and forward and

Sound is disturbed.

Is the disc played back in fast forward or fast reverse?

reverse scanning.

 

 

 

 

Is the disc scratched?

The sound may not be output if the disc is scratched.

 

 

 

 

Is the disc dirty?

Clean the disc (page 59).

 

 

 

 

Is the player properly connected to the other components (AV

• Check that you connect the player to the audio output

 

receiver or amplifier, etc.)?

terminals of a different component, etc.

 

 

• Check that you connect the player to the PHONO input

 

 

terminals of the AV receiver or amplifier, etc.

 

 

 

 

Are the connected components (AV receiver or amplifier, etc.)

Read the operating instructions of the connected components

 

properly set?

and check the volume, input, speaker settings, etc.

 

 

 

 

Are the audio cables properly connected?

Insert the cables firmly and all the way in.

 

 

 

 

Is the audio cable damaged?

If the cable is damaged, replace it with a new one.

 

 

 

 

Is Audio Output Mode properly set?

If Audio Output Mode is set to Multi-channel, the audio

 

 

signals may not be output properly from the AUDIO OUT (2

 

 

ch) terminals (page 41). Set Audio Output Mode to 2

 

 

Channel.

 

 

 

 

Are the speakers properly set?

Set Speaker Setup properly (page 41).

 

 

 

 

 

For some BDs, audio signals are only output from the optical

 

 

digital audio output terminal or the HDMI output terminal.

 

 

 

Multi-channel sound is not

Is the AV receiver or amplifier, etc. connected to the HDMI

Read the operating instructions of the connected AV receiver

output.

OUT terminal, the AUDIO OUT (7.1 ch) terminals or DIGITAL

or amplifier and check the audio output settings of AV receiver

 

OUT (OPTICAL) terminal?

or amplifier.

 

 

 

 

Is Output Terminal Priority properly set?

Linear PCM (2-channel) audio signals are output from output

 

 

terminals other than the one set at Audio under Output

 

 

Terminal Priority. Set Output Terminal Priority properly

 

 

(page 49).

 

 

 

 

Is the audio output of the connected AV receiver or amplifier,

Read the operating instructions of the connected AV receiver

 

etc., properly set?

or amplifier and check the audio output settings of AV receiver

 

 

or amplifier.

 

 

 

 

Is multi-channel sound selected?

Use the menu screen or AUDIO to switch the disc’s sound to

 

 

multi-channel.

 

 

 

 

Is Audio Out set to audio formats supported by the connected

• Read the operating instructions of the connected AV receiver

 

AV receiver or amplifier?

or amplifier and check the supported audio formats.

 

 

• Set Audio Out properly (page 41).

 

 

 

 

Are Audio Output Mode and Speaker Setup properly set?

• When the AV receiver or amplifier, etc., is connected to the

 

 

AUDIO OUT (7.1 ch) terminals, set Audio Output Mode to

 

 

Multi-channel (page 41).

 

 

• Set Speaker Setup properly (page 41).

En

Page 51 Page 53
Image 52
Page 51 Page 53
Contents Blu-ray Disc Player   Operating EnvironmentFor U.K model Symbol examples For batteriesContents Putting the batteries in the remote control What’s in the boxOpen the rear cover Insert the batteries AA/R6 xTypes of discs/files that can be played Playable discs Discs that cannot be played Non-finalized Dual Layer DVD-R discs in the DVD VR format Playing BDs  About audio formats Playing DVDs Playable files Part Names and Functions  Playable file extensionsMPEG-1 Audio Layer 3 MP3 Movie filesTools Front Panel Front Panel DisplayAudio OUT 2 ch terminals Audio OUT 7.1 ch terminalsVideo OUT terminals Hdmi OUT terminalConnecting a TV Connecting using a commercially available Hdmi cableHold the plug when connecting and disconnecting the cable  About Hdmi When connected to a DVI device  About the Hdmi high speed transmission About Hdcp  About Hdmi Control functionPlayer’s rear panel Connecting an AV receiver or amplifier Connecting using a commercially 02 available Hdmi cableConnecting using audio cables Player’s rear panelConnecting the power Cord Making settings using the Setup Navigator menu  If the Setup Navigator menu is not displayedTurn on the power. Press  STANDBY/ON Turn on the TV’s power and switch the inputCheck the settings Select Proceed, then press Enter Finish the Setup Navigator menuOutput test tones Use / to select Yes, then press EnterTV Preset code list Operating the TV with the player’s remote control03  About the screen saver Using the Tools menu  To close the Tools menu Tools menu item list Display the Tools menuSwitching the output video resolution  Press Output ResolutionSelect and set the item Erase the data About Film material  About the frame/field frequency and NTSC/ PAL TV systems To output film material Playing discs or files Forward and reverse scanning If the disc menu is displayed  To resume normal playbackSkipping content Playing specific titles, chapters or tracksPlaying in slow motion Step forward and step reverseSwitching the camera angles Switching the subtitlesSwitching the audio streams/ channels  Turning the subtitles offUsing the Play Mode functions Switching the secondary videoDisplaying the disc information Playing from a specific time Time Search To cancel the search  To cancel Time SearchPlaying a specific title, chapter or track Search  To cancel A-B Repeat play  To cancel Repeat PlaySelect A-B Repeat Select Repeat/RandomPlaying in random order Random Play  To cancel Random PlaySelect the Random Play Repeat play Random Search play Playing a specific section within aPlaying from the Home Media Gallery Playing discsPlaying movie files  Closing the Home Media GalleryPlaying music files Select MoviesSelect Music Select Folders or All SongsPlaying in the desired order HMG Playlist  Adding tracks/filesAll Songs All the recorded files are displayed If you have selected All Songs, proceed to step Playing the HMG Playlist  Deleting tracks/files from the HMG PlaylistPress Tools to display the Tools menu Select HMG Playlist Use / to select, then press EnterAdjusting the video  When Memory1, 2 or 3 is selectedAdjusting the Audio DRC  Closing the Video Adjust screen About Pure Cinema  Closing the Audio DRC screenChanging the settings Initial Setup Operating the Initial Setup screen Closing the Initial Setup screen Select and set Initial SetupSelect this when multi-system NTSC-compatible TV Select this when connected with a Standard Hdmi cable Enables Pqls functionOff Disables Pqls function Hdmi Control Device connected using an Hdmi cableChanging to other language at language setting  To change the language using numbersSelect and set Other Change the languageChanging the speaker setup  Closing the speaker settings screenSelect the speaker and change the setting Select and set SpeakersRegistering or Changing the password Adjust the output levelRe-input the password  Closing the Channel Level screenChanging the Age Restriction for watching BD-ROMs  To change the code numberSelect and set Parental Lock Change the ageChanging the Parental Lock level for watching DVDs Press Enter to set Use / to move the cursorChange the level Use / to change, then press Enter to setChanging the Country/Area code  To change the country/area code using numbersChange the country/area code Set the video and audio terminals to be used Restoring all the settings to the factory default settingsSelect and set Options About the audio output settings Troubleshooting PlaybackCh terminals page 41. Set Audio Output Mode to Are the speakers properly set? Set Speaker Setup properlyPicture is stretched Is the TV’s aspect ratio properly set? Output from the Hdmi OUT terminal or the ComponentKHz for output Secondary audio or Is Hdmi Audio Out properly set?Interactive audio is not Sound is fast or slowWhen connected using an Hdmi cable Others Language Code Table Language Code Table and Country/Area Code TableCountry/Area Code Table Specifications Place of installation Turn the power off when not using the playerCleaning the player Cleaning the pickup lens Cleaning discs  Storing discs Specially shaped discs  Condensation on discs DTS-HD High Resolution Audio  Hdcp High-bandwidth Digital Content Protection07  Deep Color  DivX Region number  S-Video output Secondary audio  Secondary videoLicenses  libxml2 OpenSSL  zlib  FreeType2 libpng  libjpg ReferencesReferences  AVC/H.264 Archive LocationsNo Warranty  GNU Lesser General Public License Page How to Apply These Terms to Your New Libraries Page Pioneer Corporation
Top Page Image Contents