Pioneer BDP-LX08 operating instructions  About audio formats,  Playing BDs,  Playing DVDs

Page 8

01 Note

Some discs cannot be played, even if one of the above logo marks is indicated.

To play 8 cm discs, set the disc in the 8 cm disc depression in the center of the disc tray. No adapter is necessary. 8 cm BD- ROMs cannot be played.

About audio formats

The following audio formats are supported on this player:

Dolby TrueHD

Dolby Digital Plus

Dolby Digital

DTS-HD Master Audio

DTS-HD High Resolution Audio

DTS Digital Surround

MPEG

MPEG-2 AAC

Linear PCM

To enjoy the surround sound of Dolby TrueHD, Dolby Digital Plus, DTS-HD Master Audio and DTS-HD High Resolution Audio, it is recommended to connect the player to an AV receiver or amplifier compatible with these audio formats using an HDMI cable. After loading a BD containing sound in one of these audio formats, select the audio format on the menu screen.

See About the audio output settings on page 50 for the output conditions of the different formats.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

Manufactured under license under U.S. Patent #: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS is a registered trademark and the DTS logos, Symbol, DTS-HD and DTS-HD Advanced Digital Out are trademarks of DTS, Inc. © 1996-2007 DTS, Inc. All Rights Reserved.

Playing BDs

BDs (BDMV) compatible with the formats below can be played.

Blu-ray Disc Read-Only (ROM) Format Version 2

Blu-ray Disc Recordable (R) Format Version 2

Blu-ray Disc Rewritable (RE) Format Version 3

This player supports BD-ROM Profile 1 Version 1.1. BONUSVIEW Functions such as playback of secondary video (Picture-in-Picture) and secondary audio can be used. For details on secondary video and secondary audio playback, refer to the disc’s instructions.

“BONUSVIEW” is trademark of Blu-ray Disc Association.

When a BD-ROM is played, additional data may be stored in the player’s memory area (local storage). If the message indicating low memory (local storage) appears, erase the BDMV data (page 24).

BDs (BDAV) compatible with the formats below can be played.

Blu-ray Disc Recordable (R) Format Version 1

Blu-ray Disc Rewritable (RE) Format Version 2

Dual Layer BDs can be played.

Movie and music files recorded on BDs cannot be played.

8 cm BD-ROMs cannot be played.

Playing DVDs

DVD-Video can be played.

DVD-R/-RW/+R/+RW discs recorded in the DVD-Video format can be played (finalize them before playing them on this player).

DVD-R/-RW discs recorded in the VR format (Video Recording format) can be played.

This label indicates playback compatibility with DVD-RW discs recorded in VR format (Video Recording format). However, for discs recorded with a record-only-once encrypted program, playback can only be achieved using a CPRM compatible device.

DVDs recorded in the AVCHD format can be played (finalize them before playing them on this player).

“AVCHD” and the “AVCHD” logo are trademarks of Matsushita Electric Industrial Co., Ltd. and Sony Corporation.

Movie and music files recorded on DVD-R/-RW/+R/+RW discs can be played. See Playable files on page 9.

Dual Layer DVDs can be played. However, non-finalized Dual Layer DVD-R discs recorded in the VR format cannot be played (finalize them before playing them on this player).

HD DVD, DVD Audio and DVD-RAM discs cannot be played.

8

En

Image 8
Contents Blu-ray Disc Player   Operating EnvironmentFor U.K model Symbol examples For batteriesContents Putting the batteries in the remote control What’s in the boxOpen the rear cover Insert the batteries AA/R6 xTypes of discs/files that can be played Playable discs Discs that cannot be played Non-finalized Dual Layer DVD-R discs in the DVD VR format Playing DVDs  About audio formats Playing BDs Playable files Part Names and Functions  Playable file extensionsMPEG-1 Audio Layer 3 MP3 Movie filesTools Front Panel Front Panel DisplayAudio OUT 2 ch terminals Audio OUT 7.1 ch terminalsVideo OUT terminals Hdmi OUT terminalConnecting a TV Connecting using a commercially available Hdmi cableHold the plug when connecting and disconnecting the cable  About Hdmi When connected to a DVI device  About the Hdmi high speed transmission About Hdcp  About Hdmi Control functionPlayer’s rear panel Connecting an AV receiver or amplifier Connecting using a commercially 02 available Hdmi cableConnecting using audio cables Player’s rear panelConnecting the power Cord Making settings using the Setup Navigator menu  If the Setup Navigator menu is not displayedTurn on the power. Press  STANDBY/ON Turn on the TV’s power and switch the inputCheck the settings Select Proceed, then press Enter Finish the Setup Navigator menuOutput test tones Use / to select Yes, then press Enter03  About the screen saver Operating the TV with the player’s remote controlTV Preset code list Using the Tools menu  To close the Tools menu Tools menu item list Display the Tools menuSwitching the output video resolution  Press Output ResolutionSelect and set the item Erase the data To output film material  About the frame/field frequency and NTSC/ PAL TV systems About Film material Playing discs or files Forward and reverse scanning If the disc menu is displayed  To resume normal playbackSkipping content Playing specific titles, chapters or tracksPlaying in slow motion Step forward and step reverseSwitching the camera angles Switching the subtitlesSwitching the audio streams/ channels  Turning the subtitles offUsing the Play Mode functions Switching the secondary videoDisplaying the disc information Playing from a specific time Time SearchPlaying a specific title, chapter or track Search  To cancel Time Search To cancel the search  To cancel A-B Repeat play  To cancel Repeat PlaySelect A-B Repeat Select Repeat/RandomSelect the Random Play  To cancel Random PlayPlaying in random order Random Play Repeat play Random Search play Playing a specific section within aPlaying from the Home Media Gallery Playing discsPlaying movie files  Closing the Home Media GalleryPlaying music files Select MoviesSelect Music Select Folders or All SongsPlaying in the desired order HMG Playlist  Adding tracks/filesAll Songs All the recorded files are displayed If you have selected All Songs, proceed to step Playing the HMG Playlist  Deleting tracks/files from the HMG PlaylistPress Tools to display the Tools menu Select HMG Playlist Use / to select, then press EnterAdjusting the video  When Memory1, 2 or 3 is selectedAdjusting the Audio DRC  Closing the Video Adjust screen About Pure Cinema  Closing the Audio DRC screenChanging the settings Initial Setup Operating the Initial Setup screen Closing the Initial Setup screen Select and set Initial SetupSelect this when multi-system NTSC-compatible TV Select this when connected with a Standard Hdmi cable Enables Pqls functionOff Disables Pqls function Hdmi Control Device connected using an Hdmi cableChanging to other language at language setting  To change the language using numbersSelect and set Other Change the languageChanging the speaker setup  Closing the speaker settings screenSelect the speaker and change the setting Select and set SpeakersRegistering or Changing the password Adjust the output levelRe-input the password  Closing the Channel Level screenChanging the Age Restriction for watching BD-ROMs  To change the code numberSelect and set Parental Lock Change the ageChanging the Parental Lock level for watching DVDs Press Enter to set Use / to move the cursorChange the level Use / to change, then press Enter to setChange the country/area code  To change the country/area code using numbersChanging the Country/Area code Select and set Options Restoring all the settings to the factory default settingsSet the video and audio terminals to be used About the audio output settings Troubleshooting PlaybackCh terminals page 41. Set Audio Output Mode to Are the speakers properly set? Set Speaker Setup properlyPicture is stretched Is the TV’s aspect ratio properly set? Output from the Hdmi OUT terminal or the ComponentKHz for output Secondary audio or Is Hdmi Audio Out properly set?Interactive audio is not Sound is fast or slowWhen connected using an Hdmi cable Others Country/Area Code Table Language Code Table and Country/Area Code TableLanguage Code Table Specifications Place of installation Turn the power off when not using the playerCleaning the player Cleaning the pickup lens Cleaning discs  Storing discs Specially shaped discs  Condensation on discs DTS-HD High Resolution Audio  Hdcp High-bandwidth Digital Content Protection07  Deep Color  DivX Region number  S-Video output Secondary audio  Secondary videoLicenses  libxml2 OpenSSL  zlib  FreeType2 libpng  libjpg ReferencesReferences  AVC/H.264 Archive LocationsNo Warranty  GNU Lesser General Public License Page How to Apply These Terms to Your New Libraries Page Pioneer Corporation