Sharp BD-HP25U Software Update Settings, Auto Update from Network, Update process, Setup

SETTINGS

Software Update Settings				Update process
				1 When this player is turned on, the Internet
In this player, the software version can be updated				connection starts automatically.
using either one of the following methods.				• “Accessing...” blinks on the screen.
• Auto Update from Network
• Manual Update from Network
• Manual Update from USB memory device				• The current version of this unit software and the
				latest version of the update file on the network are
Auto Update from Network
				displayed when latest version of firmware has been
				found.
This function allows you to perform the update by
				To update this player software with update file,
accessing an Internet connection automatically to				select “Yes”, and go to step 2.
check if there is a new firmware version every time
					Latest version of firmware has been found.
the player is turned on.		Setup
When using this function, it is required to perform					Firmware update is available.
					Proceed with update?
the following settings in advance.		1 Press a/b to select “Settings”, then press d or
					Current Version :	xxxxxxxxxx
	NOTE		ENTER.		Latest Version :	yyyyyyyyyy
		2 Press a/b to select “Software Update			If “Yes” will be selected, version update will start.
• Make sure that the LAN cable or the wireless LAN
			Settings”, then press d or ENTER.
	adapter is connected to this player and make sure that					Yes
	the wireless router/access point is connected to the	3 Press a/b to select “Auto Update Setting”,
						No
	Internet if using the wireless LAN adapter. (See pages		then press d or ENTER.
	18–19.)	4 Press a/b to select “Yes”, then press ENTER.		• If the latest firmware version has been already
• Make sure to perform the communication settings. (See
			• After this, an Internet connection will be made	updated, nothing is displayed on the screen.
	pages 46–49.)
			automatically every time this player is turned on.	2 Press ENTER to start updating.
• It may take time to access and download the update
	depending on the Internet connection and other factors.				Downloading latest firmware…
	CAUTION
					Version : yyyyyyyyyy

•Do not remove the LAN cable or the wireless LAN adapter or unplug the AC cord while downloading or

updating software. 30%

3 When the software is successfully updated, a screen is displayed indicating that the update process is completed.

• If the update has failed, an error message appears. Retry the update after checking if the broadband Internet connection (pages 18–19) and communication settings (pages 46–49) are performed properly.

4 Press POWER to turn off the player before using again.

Settings

51