Sharp BD-HP25S operation manual To Reset this Player, Troubleshooting Other, BPower

Page 63

Troubleshooting

Other

Problem	Possible causes and solutions

The TV operates incorrectly.	• Some TVs with wireless remote control capability may operate incorrectly when using the remote control of this Player.
	Use such TVs away from this Player.

The Player heats up during use.	• When using this Player, the console cabinet may heat up depending on the usage environment. This is not a malfunction.

B(On/Standby) indicator will remain lit.	• When the AC cord is removed from the outlet, the B(On/Standby) indicator will remain lit for a short period. This is
	normal and is not a malfunction.

To Reset this Player	B(Power)

•If this Player receives strong interference from a source such as excessive static electricity, strong external noise, malfunction of power supply, or voltage caused by lightning during use or a wrong operation is sent to the Player, errors like the Player not accepting an operation may occur.

Press and hold Bon the Player until “” appears on the front panel display when the Player does not operate properly even after the power has been turned off. Then, after the B(On/Standby) indicator is lit, turn on the power.

•When a reset is performed while the power is on, the Player will turn off. Turn the power on again. At this point, it may take a few moments for the system processing to finish before the Player is ready for use. During the system processing, the BD/DVD/CD mode indicator on the front panel display of the player will blink. Once the system processing has finished, the indicator will finish blinking and then light up normally. You can operate the Player when the BD/DVD/CD mode indicator is lit.

•Since all settings including the language setting stored in memory are also reset when a reset has been performed, they must be set again.

•When the problem persists even after performing a reset, unplug the AC cord and plug it in again. If this does not solve the problem, contact the nearest service centre approved by

SHARP.

Appendix

61

Image 63

Contents BD-HP25S BD-HP35S Page Introduction Power Cord ProtectionAdditional Safety Information Wireless LAN USB adapter is designed for indoor use onlyCE Statement Introduction Precautions on viewing stereoscopic 3D images Precautions when cleaning this productPrecautions on using Wireless LAN Unpacking Playing back video/picture/music contentAdjust settings to suit your preference Getting StartedContents What to do first ContentsSettings pp Streaming content pWhat would you like to do with this Player? Media Format Disc Type Recording Contents Format SizeAbout Media Types Blu-ray DiscAbout the MP3 file format Discs that Cannot Be Used with This PlayerAbout Media Types About the Jpeg file formatAbout Disc Contents Icons Used on BD/DVD Video Disc Cases Title, Chapter and TrackDisc Precautions Important InformationLicense and Copyright Major Components Main Unit Front Main Unit Rear1112 Cursor buttons a/b/c/d, Enter pp Remote Control UnitMajor Components Keylock functionConnection Connecting to a TV/projectorEEAfter connecting Projector TVConnecting to an amplifier/AV receiver Hdmi connectionDigital audio connection LAN cable Wired connection LAN cableBroadband Internet Connection Internet Modem Broadband routerWireless Modem Internet Router Wireless connection wireless LANOptional accessories After connectingBefore Starting Playback Loading the Batteries in the Remote ControlConnecting the Power Cord Remote controlEntering standby Turning the Power OnTurning the power on Indicators on the PlayerTV function control Language SettingOperating a Sharp TV Using the Remote Control Changing the on-screen display languageControlling the Blu-ray disc player Using Aquos LinkUsing Aquos Link Using 3DFunction of the selected button icon is available Control PanelTo stop playback Video/Picture/Music PlaybackLoading a Disc BD/DVD Video PlaybackStart playback by selecting a title from the top menu Using the disc menuDisplaying the disc information BD/DVD MenusRear Using the pop-up menuEnjoying Bonusview or BD-LIVE Press POP-UP Menu during playbackVirtual Package To remove the secondary video, press PinP againPrimary audio Secondary audio Video Video/Picture/Music Playback About Title List DVD-R/-RW VR format / BD-RE/-RPlayback by selecting a title Bdav format PlaybackPlayback from the beginning or resume playback Playback by selecting a chapterSorting the titles Playback by selecting a PlaylistPlayback by selecting a track Operation procedure for the Functions menuAudio CD Playback Playback from the beginningPress a/bto select a folder or file Audio Data MP3 File PlaybackList of available buttons during playback Press a/bto select Music, then press dorSlide Show Menu Displaying Still Images Jpeg filesOperational buttons during still image DisplayAbout a home network Accessing Dlna serversBefore accessing Dlna servers Playback by selecting a file listPause/Frame Advance Playback When playing back a DVDPlayback Functions Fast Forward/Reverse SearchPress Enter Repeat Playback of a Title or Chapter Repeat PlaybackPartial Repeat Playback Repeat Playback of a Specified Part Playback FunctionsDisplaying the Audio Information Switching SubtitlesSwitching the Angle Stereo is displayed. Audio cannot be switchedSettings During Playback Function control operation procedureFunction Control Functions which can be set Settings During PlaybackPress a/bto select Aquos LINK, then press dor Enter Press a/bto select Settings, then press dor EnterSettings Common operationsBasic Operation for Playback Setting When setting the PIN code for the first timeSettings Audio Out Audio Video SettingsHdmi Video Out Secondary AudioSmart Settings Playback Setting On Screen Language VersionSystem When selecting Cable Communication SetupWhen selecting Wireless Press ENTER, then enter the access point name Information on MAC addressesPress ENTER, then enter the security key code Operation procedure for inputting characters manually Input character listRepeat to 5 to finish inputting all the required characters USB Memory Management Before using the USB memory deviceSetup Software Update SettingsAuto Update from Network Update processManual Update from Network Manual Update from USB memory devicePress Bto turn off the player During the data checking, Checking blinks Enter the 4-digit number usingWith update file, select Yes, and press Enter Press Enter to start checking data in the USB memory deviceChannels About Output of Audio FormatsRemove the USB memory device Audio format Maximum numberPlaying back Playing back video on demand streaming contentPlaying back YouTube content VOD contentCommunication conditions for IP PC control of the Player for BD-HP35S onlyUP a Down b Left c Right d Command listPC control of the Player AppendixBasic Operation TroubleshootingPower Problem Possible causes and solutionsPicture Troubleshooting PlaybackNetwork Troubleshooting SoundWhen the wired Internet connection is made When the wireless Internet connection is madeTo Reset this Player Troubleshooting OtherBPower Error message Possible Error Suggested Solution On-screen Error MessagesInput/Output SpecificationsSpecifications are subject to change without notice GeneralSpecifications Wireless LAN USB Adapter for BD-HP35S only Glossary DVD video pages 9 Infrastructure modeDVD upscaling Hdmi MP3 pages 9-11, 32Top menu Glossary Parental control Time number pages 14Title number pages 38 Pop-up menuNetwork Service Disclaimer About Software License Information on the Software License for This ProductSoftware License Notice End of Life Disposal Information on Disposal for Users private householdsInformation on Disposal for Business Users Memo Sonninstraße 3, 20097 Hamburg, Germany