English
[TV]
•[TV Screen]
Select the screen format according to how you want the picture to appear on the TV.
{16:9 Full} – for a disc with the aspect ratio of 4:3, the output video is stretched into 16:9 full screen.
{16:9 Normal} – for a disc with the aspect ratio of 4:3, the output video is resized vertically to match what will be seen on the display.
{4:3 Pan&Scan} – for standard TV, Display a wide picture on the entire screen and cuts off the redundant portions.
{4:3 Letterbox} – for standard TV, Display a wide picture with two black borders on the top and bottom of 4:3 screen.
•[Resolution]
Select a video output resolution that is compatible with your TV display capability.
{Auto} – Select the most suitable resolution according to the TV . {480i}, {480p}, {720p}, {1080i}, {1080p}
– Select a video resolution setting that is best supported by the TV. See TV manual for details.
Note:
-When resolution is set to 720p/1080i/1080p:
(1)If only CVBS connected, the resolution of CVBS video output will be set to 480i automatically.
(2)If HDMI and CVBS are both connected, there will be no CVBS video output, instead, a message will be shown as follows:
Out Of Range:Check Display Resolution
•[Color Space]
Select a predefined Color space of picture.
{RGB} – Select RGB Color space.
{YCbCr} – Select YCbCr Color space. {YCbCr422} – Select YCbCr422 Color space.
{Full RGB} – Select Full RGB Color space.
•[HDMI Deep Color]
This feature is available only when the display device is connected by a HDMI cable, and when it supports deep Color feature.
{30 bits} – Output 30 bits Color. {36 bits} – Output 36 bits Color. {Off} – Output standard 24 bits Color.
Note:
-When the color space is "YCbCr422", even if HDMI
Deep Color is set to 30bits/36bits, it is not output with Deep Color.
•[HDMI 1080/24p]
{On} – Enable 1080/24p video resolution setting.
{Off} – Disable 1080/24p video resolution setting.
Notes about HDMI 1080/24p:
If you want the 24Hz output, it should fulfill below
3 conditions:
1.TV supports the 24Hz display;
2.Player choose the 24Hz option in the setup menu;
3.Media must be the 24Hz video.
Notes:
-This resolution becomes effective only when the playing
-During HDMI 1080/24p playback, there will be no composite output.
[Video Process]
Display Setting
TV | Video Adjust | More... |
Video Process | Sharpness | Low |
Motion Video...
Move cursor key to select menu option | SETUP | Exit | |
then use “OK ” key to select | |||
|
|
•[Video Adjust]
Select a predefined setting of the video.
1.Press OK .
2.Press/ to adjust the video
Brightness, Contrast, Hue and Saturation.
{Brightness} - press t/ to adjust the brightness of display, goes left means dark and right means bright. {Contrast} - press t/ to adjust the contrast of display, goes left means low contrast and right means high contrast.
{Hue} - press t/ to adjust the Hue of display, goes left means low hue and right means high hue.
{Saturation} - press t/ to adjust the saturation of display, goes left means low Saturation and right means high saturation.
18