Audio Setting

3. Press RETURN to exit.

Brightness

Contrast

Hue

Saturation

Change		RETURN Exit

•[Sharpness]

Select the level of sharpness: High, Middle, Low

{High} - Select High sharpness level {Middle} - Select Middle sharpness level

{Low} - Select Low sharpness level

[Motion Video Process]

Display Setting

TVVideo Mode Standard

Video Process

Motion Video...

Move cursor key to select menu option	SETUP	Exit
then use “OK ” key to select

•[Video Mode]

Select the output mode of video, options include: Standard, Vivid, Smooth, these can change the output display.

{Standard} - output video signal without any processing and in standard mode. {Vivid} - output video signal in vibrant color mode.

{Smooth} - output video signal in smooth mode.

1. Press SETUP, [General Setting] menu is displayed.

2. Press  to select [Audio Setting], then press .

3. Select an option, press  to access.

Audio Setting

Audio Output	Spdif	PCM
	HDMI	PCM
	Down_samp	48K
	DRC	Off

Move cursor key to select menu option	SETUP	Exit
then use “OK ” key to select	SETUP	Exit
then use “OK ” key to select

4. Press / to select a setup option and press .

5. Select the setting you wish to change and press OK to confirm.

-Press  to return to the previous menu.

-Press SETUP to exit the menu.

[Audio Output]

•[Spdif]

Select the output mode of COAXIAL jack, options include Bitstream, PCM, Re-encode and Off.

{Bitstream} – Output digital signal without any processing.

{PCM} – Output digital signal with processing, only two channels export. {Re-encode} – Auto select signal type from COAXIAL jack according to the Audio stream on disc.

{Off} – No output for S/PDIF.

•[HDMI]

Select the output mode of HDMI Out jack, options include Bitstream, PCM, Re-encode and Off.

{Bitstream} – Output HDMI digital signal without any processing. {PCM} – Output HDMI digital signal with processing, only two channels export.

{Re-encode} – Auto select signal type from HDMI Out jack according to the Audio stream on disc.

{Off} – No output for HDMI.

•[Down_samp]

Select the digital audio signal sampling frequency.

{48K} – For discs recorded at sampling rate of 48 kHz.

{96K} – For discs recorded at sampling rate of 96 kHz.

{192K} – For discs recorded at sampling rate of 192 kHz.

•[DRC]

Select the Dynamic Range Control mode which makes it available to listen to a movie at a low volume without losing sound clarity.

{Off} – Non-dynamic range compress. {On} – Dynamic range compress. {Auto} – Adjust the DRC according to input audio.

The setting of Auto is effective for Dolby TrueHD.

English