Toshiba BDX1100KC owner manual Display Setting

English

Display Setting

1. Press SETUP

[General Setting] menu is displayed. 2. Press  to select [Display Setting],

then press  .

3. Select an option, press  to access.

... Display Setting...

TV	TV Screen	16:9 Normal
Video Process	Resolution	480I/576I
Motion Vide...	Color Space	YCbCr422
	HDMI Deep Color	Off
	HDMI 1080P 24F	On

Move cursor key to select menu option	SETUP	Exit
then use “OK” key to select

4. Press / to select a setup option and press 

5. Select the setting you wish to change and press OK to confirm.

-Press  to return to the previous menu.

-Press SETUP to exit the menu.

[TV]

•[TV Screen]

Select the screen format according to how you want the picture to appear on the TV.

{16:9 Full} – for a disc with the aspect ratio of 4:3, the output video is stretched into 16:9 full screen.

{16:9 Normal} – for a disc with the aspect ratio of 4:3, the output video is resized vertically to match what will be seen on the display.

{4:3 Pan&Scan} – for standard TV, Display a wide picture on the entire screen and cuts off the redundant portions.

{4:3 Letterbox} – for standard TV, Display a wide picture with two black borders on the top and bottom of 4:3 screen.

•[Resolution]

Select a video output resolution that is compatible with your TV display capability.

{Auto} – Select the most suitable resolution according to the TV . {480I/576I}, {480P/576P}, {720P}, {1080I}, {1080P}

– Select a video resolution setting that is best supported by the TV. See TV manual for details.

Note:

-When resolution is set to 720p/1080i/1080p:

(1)If only CVBS connected, the resolution of CVBS video output will be set to 480i/576i automatically.

(2)If HDMI and CVBS are both connected, there will be no CVBS video output, instead, a message will be shown as follows:

Out Of Range:Check Display Resolution

•[Color Space]

Select a predefined Color space of picture.

{RGB} – select RGB Color space.

{YCbCr} – select YCbCr Color space.

{YCbCr422} – Select YCbCr422 Color space.

{Full RGB} – select Full RGB Color space.

•[HDMI Deep Color]

This feature is available only when the display device is connected by a HDMI cable, and when it supports deep Color feature.

{30 bits} – Output 30 bits Color. {36 bits} – Output 36 bits Color. {Off} – Output standard 24 bit Color.

Note:

-When the color space is "YCbCr422", even if HDMI Deep Color is set to 30bits/36bits, it is not output with Deep Color.

•[HDMI 1080p 24F]

{On} – Enable 1080p 24F video resolution setting.

{Off} – Disable 1080p 24F video

resolution setting.

About HDMI 1080p 24F Notes:

If you want the 24Hz output, it should fulfill below 3 conditions:

1.TV supports the 24Hz display:

2.Player choose the 24Hz option in the setup menu;

3.Media must be the 24Hz video. Notes:

-This resolution becomes effective only when the playing BD-Disc contents are Film source.

-During HDMI 1080p 24F playback, there will be no composite output.

[Video Process]

... Display Setting...

TV	Video Adjust	More...
Video Process	Sharpness	Low

Motion Video...

Move cursor key to select menu option	SETUP	Exit
then use “OK” key to select

18