Toshiba BDX1100KC owner manual Troubleshooting, Problem Tip

English

8 Troubleshooting

If you experience any of the following difficulties while using this unit, check the list below

before consulting your nearest TOSHIBA dealer.

Problem	Tip
No reaction to the	Connect the product to the power outlet.
remote control.
	Point the remote control at the product.
	Insert the batteries correctly.
	Insert new batteries in the remote control.
No video signal on the	Turn on the TV.
display device.
	Set the TV to the correct external input.
	Select the correct video resolution.
	Set TV System of TV correctly.
No video output through	Set Resolution of HDMI to 480i/576i or 480p/576p.
VIDEO OUTPUT jack.
No audio / video signal	If the unit is connected to the unauthorized display device with
on the display device via	an HDMI cable, the audio/video signal may not be output.
HDMI cable.
No high-definition video	Does the disc contain high-definition video? High-definition
signal on the TV.	video is not available when the disc does not contain it.
	Does the TV support high-definition video? High-definition video
	is not available when the TV does not support it.
No audio signal from the	Assign the audio input of the TV to the corresponding video
loudspeakers of the TV.	input.
No audio signal from the	Turn on the audio system.
loudspeakers of the
	Set the audio system to the correct external input.
audio system.
	Increase the volume level of the audio system.

22