Audio Setting

•[Video Adjust]

Select a predefined setting of the video.

1.Press OK .

2.Press/ to adjust the video

Brightness, Contrast, Hue and Saturation.

{Brightness}- press t/ to adjust the brightness of display, goes left means dark and right means bright.

{Contrast}- press t/ to adjust the contrast of display, goes left means low contrast and right means high contrast.

{Hue}- press t/ to adjust the Hue of display, goes left means low hue and right means high hue.

{Saturation}- press t/ to adjust the saturation of display, goes left means low Saturation and right means high saturation.

3.Press RETURN to exit.

Brightness

Contrast

Hue

Saturation

Change

RETURN Exit

•[Sharpness]

Select the level of sharpness: High, Medium, Low

{High} - Select High sharpness level

{Medium} - Select Medium sharpness level

{Low} - Select Low sharpness level

[Motion Video Process]

... Display Setting...

TV	Video Mode
Video Process
Motion Video...
Move cursor key to select menu option		SETUP	Exit
then use “OK” key to select		SETUP	Exit
then use “OK” key to select

•[Video Mode]

Select the output mode of video,options include: Standard, Vivid, Smooth, these can change the output display.

{Standard} output video signal without any processing and in standard mode. {Vivid} output video signal in vibrant color mode.

{Smooth} output video signal in smooth mode.

1. Press SETUP

[General Setting] menu is displayed. 2. Press  to select [Audio Setting],

then press  .

3. Select an option, press  to access.

... Audio Setting...

Audio Output	Spdif	PCM
	HDMI	PCM
	Down_samp	48K
	DRC	Off

Move cursor key to select menu option	SETUP	Exit
then use “OK” key to select

4. Press / to select a setup option and press 

5. Select the setting you wish to change and press OK to confirm.

-Press  to return to the previous menu.

-Press SETUP to exit the menu.

[Audio Output]

•[Spdif]

Select the output mode of COAXIAL jack, options include Bitstream, PCM, Re-encode and Off.

{Bitstream} – Output digital signal without any processing.

{PCM} – Output digital signal with processing, only two channels export. {Re-encode} – Auto select signal type from COAXIAL jack according to the Audio stream on disc.

{Off} – No output for S/PDIF.

•[HDMI]

Select the output mode of HDMI Out jack, options include Bitstream, PCM, Re-encode and Off.

{Bitstream} – Output HDMI digital signal without any processing. {PCM} – Output HDMI digital signal with processing, only two channels export.

{Re-encode} – Auto select signal type from HDMI Out jack according to the Audio stream on disc.

{Off} – No output for HDMI.

•[Down_samp]

Select the digital audio signal sampling frequency.

{48K} – For discs recorded at sampling rate of 48 kHz.

{96K} – For discs recorded at sampling rate of 96 kHz.

English