26System Setting
Settings
Initial setup
5.Use w/s/a/dto select the IP mode between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP address automatically.
3
System Setting
When you turn on the unit for the first time, the initial setup wizard appears on the screen. Set the display language and network settings on the initial setup wizard.
1.Press 1(POWER).
The initial setup wizard appears on the screen.
2.Use w/s/a/dto select a display language and press ENTER (b).
3.Read and prepare the preparations for the network settings and then press ENTER (b) while [Start] is highlighted.
If wired network is connected, the network connection setting will automatically be finished.
4.All available networks are displayed on the screen. Use w/sto select [Wired Network] or desired SSID of wireless network and press ENTER (b).
6.Select [Next] and press ENTER (b) to apply network settings.
Network connection status is displayed on the screen.
For details on network settings, refer to “Connecting to your Home Network” on page 19.
7.Check all the settings that you have set in the previous steps.
Press ENTER (b) while [Finish] is highlighted to finish the initial setup settings. If there is any settings to be changed, use a/dto select [Previous] and press ENTER (b).
If you have security on your access point, you need to input the security code as necessary.