LG Electronics BP200 owner manual Troubleshooting, General, Symptom Cause & Solution

Page 46

5

Troubleshooting

46Troubleshooting

Troubleshooting

General

Symptom

Cause & Solution

 

 

The Power does not turned on.

yy Plug the power cord into the wall outlet securely.

 

 

The unit does not start

yy Insert a playable disc. (Check the disc type, color system, and regional

playback.

code.)

 

yy Place the disc with the playback side down.

 

yy Place the disc on the disc tray correctly inside the guide.

 

yy Clean the disc.

 

yy Cancel the Rating function or change the rating level.

 

 

The angle cannot be changed.

yy Multi-angles are not recorded on the DVD Video being played.

 

 

Cannot play video, photo or

yy The files are not recorded in a format that the unit can play.

audio files.

yy The unit does not support the codec of the video file.

 

 

 

The remote control does not

yy The remote control is not pointed at the remote sensor of the unit.

work properly.

yy The remote control is too far from the unit.

 

 

yy There is an obstacle in the path of the remote control and the unit.

 

yy The batteries in the remote control are exhausted.

 

 

The unit is plugged in, but the

You can reset the unit as follows.

power will not turn on or off.

yy Unplug the power cord, wait at least five seconds, and then plug it in

 

The unit is not operating

again.

 

normally.

 

 

 

Image 46
Contents Network Blu-ray Disc / DVD Player Is intended to alert the user to Safety informationInstructions in the literature accompanying the product FCC Compliance Statement Responsible PartyGetting Started Important Safety Instructions Table of Contents Troubleshooting Logo Symbol Description Playable discs and symbols used in this manualIntroduction About the 7 symbol display Compatibility notes Audio files File requirementVideo files Photo filesAvchd Advanced Video Codec High Definition Regional code Certain system requirementsFor high definition video playback Remote control Battery installationFront panel Rear panelConnecting the AC adapter Connecting to your TVWhat is SIMPLINK? Additional information for HdmiResolution setting Connecting to an amplifier via Hdmi output Connecting to an amplifierAbout digital multi-channel sound Connecting to an amplifier via digital audio output Wired network connectionUse w/sto select Wired and press Enter b Wired network setupAdvanced Setting PreparationBetween Dynamic and Static Use w/s/a/dto select the IP modeSelect Next and press Enter b to apply network settings Normally, select Dynamic to allocate an IPWireless network setup Advanced Setting Router or modem. After connecting the player Yy Many network connection problems duringSet up can often be fixed by re-setting To the home network, quickly power offPlayback content in the USB device USB device connectionSettings Initial setupDisplay menu Adjust the setup settingsTV Aspect Ratio 1080p Display Mode ResolutionHdmi Color Setting Home Menu GuideDisplay Menu Language menuAudio menu Disc Menu/Disc Audio Disc SubtitleSampling Freq Digital Audio Output DRC Dynamic Range ControlDVD Rating PasswordLock menu Blu-ray Disc RatingNetwork menu Initialize Auto Power OffOthers menu SoftwareGeneral playback Using Home menuScreen Setup Adjusts the system settings Playing a discEnjoying BD-Live Insert a BD-ROM with BD-LiveUsing the disc menu Audio content ContentBasic operations for video Last scene memory Advanced playbackResume playback Repeat playbackRepeating a specific portion Viewing content informationChanging content list view MethodSelecting a subtitle file Options while viewing a photoListening to music while slide show Displaying content information on-screenOn-screen display You can display photo files while listening to audio filesPlaying from selected time Selecting a subtitle languageChanging the TV aspect ratio Hearing a different audioWatching from a different angle Changing subtitle codeChanging the picture mode Setting the User setting optionAudio CD recording Using the premium Symptom Cause & Solution TroubleshootingGeneral Network Picture Customer support Open source software noticeBy pressing You can Controlling a TV with the supplied remote controlSetting up the remote to control your TV Manufacturer Code NumberSoftware update Network software updateNetwork update notification OptionDo not turn off the power during the software update Choose an area code from this list Area code listArea Code Language code list Language CodeTrademarks and licenses Color is a trademark of Sony CorporationCinavia Notice Audio output specifications Appendix P-p, 75 Ω, RCA jack x SpecificationsIeee 802.11b/g/n 2.4GHz band Maintenance Handling the unitImportant information relating to network devices