LG Electronics BP200 owner manual Wireless network setup

22Connecting

2

Connecting

Wireless network setup

For the wireless network connection, the player needs to be set up for network communication. This adjustment can be done from the [Setup] menu. Adjust the [NETWORK] setting as follow. Setting up the access point or the wireless router is required before connecting the player to the network.

Preparation

Before setting the wireless network, you need to:

-- connect the broadband internet to the wireless home network.

-- set the access point or wireless router.

-- note the SSID and security code of the network.

1.Select [Connection Setting] option in the [Setup] menu then press ENTER (b).

2.Read the preparations for the network settings and then press ENTER (b) while [Start] is highlighted.

If wired network is not connected to the unit, all available networks are displayed on the screen.

3.Use w/sto select a desired SSID of wireless network and press ENTER (b).

If you have security on your access point, you need to input the security code as necessary.

,,Note

yy WEP security mode generally have 4 keys available on an access point setting. If your access point or wireless router use WEP security, enter the security code of the key “No.1” to connect on your home network.

yy An Access Point is a device that allows you to connect to your home network wirelessly.

4.Use w/s/a/dto select the IP mode between [Dynamic] and [Static].

Normally, select [Dynamic] to allocate an IP address automatically.

,,Note

If there is no DHCP server on the network and you want to set the IP address manually, select [Static] then set [IP Address], [Subnet Mask], [Gateway] and [DNS Server] using w/s/ a/dand numerical buttons. If you make a mistake while entering a number, press CLEAR to clear the highlighted part.

5.Select [Next] and press ENTER (b) to apply network settings.

Network connection status is displayed on the screen.

6.Select [Close] and press ENTER (b) to complete the network connection.