Samsung 895M setup guide EZ Record, Getting Connected, Antenna + HDD & DVD Recorder + TV

Page 1

Quick Setup Guide

1EZ Record

2Getting Connected

3DTV Functions

4Basic Operation

HDD & DVD RECORDER DVD-893M/895M/897M

1EZ Record

 

Recordable Discs

This function allows you Initialise and Finalise a disc automatically.

DVD-RAM/±RW/±R

(Refer to page 48 of the Instruction Manual for more information.)

 

1.With the unit in Stop mode, press the MENU button.

2.

Press the

buttons to select Setup, then press the OK or ► button.

3.

Press the

buttons to select Recording, then press the OK or ► button.

4.

Press the

buttons to select EZ Record, then press the OK or ► button.

5.

Press the

buttons to select On, then press the OK or ► button.

Press the EXIT button to exit the menu.

6.Insert a disc.

If the disc is new, it is initialised to V mode automatically. (DVD-RW only)

7.Press the REC button.

2Getting Connected

Select one of the following three types of connections :

The VHF/UHF RF OUT jack of this product sends only signals received through the antenna. It does not output audio/video signals.

You must use one of the following connections on this unit.

Antenna + HDD & DVD Recorder + TV

You can connect your HDD & DVD Recorder to the television using the SCART cable if the appropriate input is available on the television. You thus:

Obtain better quality sound and pictures

Simplify the setting up procedure of your HDD & DVD Recorder Connect the RF cable as shown.

Connect one end of the SCART cable to the AV1 jack

 

on the rear of the HDD & DVD Recorder. Also use the

 

Video/Audio Cable to connect AUDIO OUT(R/L)/VIDEO

 

OUT jacks on the HDD & DVD Recorder to the Audio &

 

Video jacks on the TV.

To RF IN

For the best picture quality, if your TV has Component

 

video jacks, you can use component cables instead of

To RF OUT

the yellow video connector on the Video/Audio cable. If

your TV has a HDMI or DVI jack, you can use the HDMI

RF Cable

or HDMI-DVI cable instead of the yellow video

 

connector on the Video/Audio cable.

 

If you have an AV amplifier

 

Connect either audio cables from the AUDIO OUT(R/L) jacks on

 

the HDD & DVD Recorder to the AUDIO IN jacks on your AV

 

amplifi er, or a digital cable from the DIGITAL AUDIO OUT

To ANT INPUT

(OPTICAL) jack on the HDD & DVD Recorder to the DIGITAL

 

AUDIO IN jack on your AV amplifi er.

 

English-1

AV amplifier (receiver)

OR

HDD & DVD Recorder

OR

OR

OR

TV

C Samsung Electronics

Image 1
Contents Getting Connected EZ RecordAntenna + HDD & DVD Recorder + TV Antenna + VCR/Satellite receiver + HDD & DVD Recorder + TV Connecting HDMI/DVI to a TVBasic Operation DTV FunctionsFinalising a Disc Making a Timer RecordingAnynet+HDMI CEC Disc compatibility