USER’S MANUAL
1-5. Remote controller
Please note: Some DVR models use a remote control with a slightly different shape. The buttons and their functions are the same.
How to set the ID of remote controller:
1.Press cancel button for about 3 seconds, until the light on the power button lights up.
2.Enter XX, where XX is the two digit numbers which is the ID of remote controller.
※Remember, when entering a one digit number to input ‘0’ first. Eg. To set the ID to ‘2’ as ID, input “02”.
3.Each time you press the number key the light of power button will blink.
4.When the power light goes out, the ID is saved.
H.264 REAL TIME DVR
10