USER’S MANUAL
1.Hard disk installation of replacement
A.Hard disk installation
After shutting down the DVR, unplug the power from the outlet.
①Loosen the screw on the left, right and rear side of the DVR casing.
②Separate the cover of the main unit.
③Remove the screws on the bracket holding the hard disk. Then, separate the bracket from the hard disk.
④Install the hard disk to the bracket and tighten the 4 screws.
▶Connecting bracket to hard disk
Orient the SATA cable connection port towards the base of the hard disk bracket, and secure the HDD in place.
Connect the bracket to hard disk by tighten the 4 screws
⑤After installing the bracket on the main unit, tighten the screws.
⑥Connect the power cable of the hard disk.
⑦Connect the SATA cable to the hard disk.
[Connecting power cable] | [Connecting SATA cable] |
|
|
⑧Connect the SATA cable to the SATA port of the main board.
⑨Close the cover of the main unit.
H.264 REAL TIME DVR
14