USER’S MANUAL
Setting a new preset position
1.Move the camera to a position using direction buttons (⑤).
2.Select the preset number to set using button (⑨).
3.Click button ⑪ “SET”.
4.Repeat steps 1 ~ 3 to set other preset positions.
※You can set up to 10 preset positions.
※Not all cameras are compatible with presets. Check your camera’s manual.
Moving camera to preset position
1.Select the preset number to move using button (⑨).
2.Click on the “GO” button (⑩)
※Moving camera to preset position is only available when the camera supports preset feature.
Deleting preset position
1.Select the preset number to delete using preset number button ⑨.
2.Click button ⑫ “CLEAR”.
※Deleting preset position is only available when the camera supports.
Starting touring
1.Click button ⑬ “START”.
2.Then it will start traversing each preset position one by one.
Stopping touring
1.Click button ⑭ “STOP”.
2.Then it will stop touring.
Notice
If you change a preset position whilst in Touring mode, the touring will automatically stop.
H.264 REAL TIME DVR
46