Samsung 31 user manual Using the mouse, Status LEDs, Name Description, Status LED descriptions

Chapter 3: Operating instructions

Item	Name	Description
4	USB ports	Connect USB devices.
5	CD/DVD drive	Insert media for archiving.
6	Archive button	Begin archiving or displays the Archive screen.
		Press once to begin copying a video segment for export
		while in playback mode. Press again to stop copying.
		See “Archiving recorded files” on page 36 for more
		information.
7	Status LEDs	Display device status and conditions. See “Status
		LEDs” below for more information.
8	Function buttons	Change the DVR 31 operating mode. For example,
		press PTZ to go into PTZ mode. See “Operating
		modes” on page 17 for more information.
9	Playback controls	Control video playback speed.

Status LEDs

The LEDs on the front panel of the DVR are described as follows.

Table 3: Status LED descriptions

LED	Name	Description
	Power	Steady indicates that the correct power is connected to the unit.
	Network	Blinking indicates that the DVR is connected to a network.
	Alarm	Steady indicates that an alarm is triggered.
REC	Record	Blinking indicates that the DVR 31 is recording. Steady indicates
		hard drive failure.

Using the mouse

Use the USB mouse provided with the DVR 31 to carry out the same operations as the front panel and remote control. Connect the mouse to the DVR 31 by plugging the mouse USB connector into one of the USB ports on the front panel. The mouse is immediately operational and the pointer should appear.

Click the left mouse button to enter or confirm a selection. This is similar to pressing Enter button on the front panel. Click the right mouse button to the exit setup menus and save the settings. Use the scroll wheel to change values. Mouse sensitivity can be adjusted in the Systems menu.

12 truVision DVR 31 User Manual