Samsung VP-D200 manual Audio dubbing VP-D230i/D250i/D270i only, Dubbing sound

ENGLISH

Advanced Recording

Audio dubbing (VP-D230(i)/D250(i)/D270(i) only)

✤The AUDIO DUBBING function only works in PLAYER Mode.

✤You can add sound to the original sound on a pre-recorded tape, recorded in SP mode with 12bit sound.

✤Use the internal and external microphones or other audio equipment.

✤The original sound will not be erased.

Dubbing sound

1.Set the camcorder to PLAYER mode.

■If you want to use an external microphone, connect the microphone to the external MIC input jack on the camcorder.

■When you wish to dub using the External A/V input, connect the AUDIO/VIDEO cable to the camcorder by inserting the AUDIO/VIDEO cable into the AV Jack at the right side of the camcorder.

(VP-D230i/D250i/D270i only)

-Press the MENU button, move the MENU SELECTOR to highlight A/V and push the MENU SELECTOR.

-Move the MENU SELECTOR to highlight AV IN/OUT and push the MENU SELECTOR to select AV IN/OUT.

-Push the MENU SELECTOR to select AV IN.

2.Press the (PLAY/STILL) button and find the timeframe of the scene to be dubbed.

3.Press the (PLAY/STILL) button to pause the scene.

4.Press the A.DUB button on the Remote Control.

■A.DUB will be displayed on the LCD.

■The camcorder is in a ready-to-dub state for dubbing.

5. Press the	(PLAY/STILL) button to start dubbing.	MENU
■ Press the	(STOP) button to stop the dubbing.
		MF
Notes

Audio (L) Audio (R)

AV IN

(VP-D230i/D250i/D270i only)

FADE

S.SHOW

BLC

TAPE

■You can not use the audio dubbing function while playing a write protected video tape.

■You must use the external microphone jack size of below 11.5Ø.

■When you wish to dub using the External A/V input, you must connect the AUDIO/VIDEO cable to the audio system from which you wish to record. (VP-D230i/D250i/D270i only)

64 ■ You cannot dub sound on a pre-recorded tape in LP mode or 16 bit mode.