![](/images/new-backgrounds/1251983/25198327x1.webp)
Setting Up and Connecting
Things to know before you connect the
Protect your components from power surges
Always turn off and unplug your
Make sure to position all cables correctly to avoid audio hum or interference
•Make sure that all cables are plugged or screwed tightly into their jacks.
•After connecting the components, please run the audio/video cables along the side of the TV set, rather than straight down the back of the TV.
•Please make sure that all antennas and cables are properly grounded.
Make sure to protect your components from overheating
•Do not block ventilation holes in the top of the
•Do not stack components.
•If you are positioning the components in a stand or rack, make sure to allow for proper ventilation.
•If you have a stereo amplifier or receiver as a system component, please place it on the top shelf or top rack so that hot air rising from it will not flow around other components.
9