Atek electronic Multimedia Remote Control user manual Engage the safety lock feature described on

Page 13

∙Wheel button is in scroll mode. In PowerPoint® be sure to push the wheel button gently up and down only, not in. Pushing in engages scroll mode (the button illuminates), which does not work in PowerPoint®.

∙F5/Esc button does not work. Certain earlier versions of PowerPoint® and other applications may not support F5 and/or Esc functions.

∙Two or more Tote-Remotes are interfering with each other. In the unlikely event that you are using two or more Tote-Remotes in the same location that were coincidently randomly set to the same ID code in the factory, you can change the ID code of one of them:

1.Engage the safety lock feature described on page 7.

2.Hold the laser pointer button in and at the same time push the wheel button down (not in) - hold both buttons in that position for several seconds until the laser button backlight (not laser beam) turns off, and then release both buttons.

3.The laser button backlight should flash several times to confirm that the ID code has been successfully changed.

4.Disengage the safety lock feature (same procedure as step 1 - see page 7).

5.Follow the procedure on page 5 for resetting the receiver to learn the new ID code of the Tote -Remote.

12

Page 12 Page 14
Image 13
Page 12 Page 14
Contents User’s Manual For Tote-Remote Table of Contents Important Safety & Health Information Page Introduction Installation Features & Operation Page Operation Overview Special Applications Compatibility & System Requirements Troubleshooting Engage the safety lock feature described on Also please note the following important information MAINTENANCE, SERVICE, & SupportONE Year Limited Warranty Save Your Receipt AS Proof of Purchase Date FCC Statement Regulatory InformationCanada Statement LaserModel # RM100 Serial # Purchase RecordDate of Purchase Contact Information For service and support, please contact Atek, IncTote-Remote User’s Manual Rev
Top Page Image Contents