Troubleshooting

∙Remote control ID code needs to be learned by receiver. See Installation section on page 5.

∙Incompatible operating system or missing operating system drivers. See Compatibility and System Requirements section on page 10.

∙Make sure you have installation/administration privileges on your laptop. Ask your network administrator or computer consultant for assistance.

∙Problems with USB port or USB hub. Make sure the USB receiver is plugged all the way into the port. Try plugging it directly into the computer instead of using a USB hub. Do other USB devices work on your computer? If not, perhaps the USB port is not enabled. Consult with the manufacturer of the computer.

∙Battery problems. Make sure the writing on the battery is facing up. Check to make sure the battery compartment cover is fully closed. The battery may be weak - if the laser beam does not stay on or emits a dim beam, the battery may need to be replaced. Your

Tote-Remote uses one 3V CR2032 coin cell type lithium battery. It’s a good idea to keep a spare one on hand.