RCA RCR311S manual Troubleshooting

Page 14

RCR311S_NA_IB_REVB_K4.qxd 7/27/04 11:41 AM Page 14

ON•OFF

ON•OFF

5.Once the second number is entered, the illuminated ON•OFF key turns off.

!TIP: Any keypress other than the number keys is ignored. If you don’t enter the sleep time within 10 seconds after pressing the SLEEP key, you must start over at step 1. The illuminated ON•OFF key blinks four times and then turns off, indicating your attempt to program the Sleep Timer has been unsuccessful.

6.The Sleep Timer is now set.

7.Leave remote aimed at the TV. Once the Sleep Timer is set, you can continue to use the remote without affecting the Sleep Timer. However, because the timing mechanism for the Sleep Timer is built into the remote itself, the remote must be in TV Mode and pointed at the TV to activate the Sleep Timer.

CANCELING THE SLEEP TIMER

1.The Sleep Timer program will be canceled and reset to zero by pressing and releasing the

ON•OFF key.

Troubleshooting

Problem: The remote does not operate your component.

•You must put the remote in the correct mode by pressing the corresponding component key (TV, VCR•DVD, SAT•CBL) so the remote knows which component you want to operate.

•Remove any obstacles between the remote and the component. Make sure to aim the remote at the IR sensor on the component.

•Make sure the batteries are fresh and are properly installed. (See Battery Installation on page 3.)

Replace the batteries with two new AA batteries, if necessary. Reprogramming may be required.

•Reset the remote. Remove the batteries, then press and hold the number 1 key on the remote for several seconds to reset the microprocessor inside the remote. Release

the number 1 key, reinstall the batteries, and press the ON•OFF key. If it lights up, reprogram the remote and try again. If it doesn’t light up, replace the batteries with new ones.

Problem: The remote can’t be programmed to operate your component.

•If you are testing the remote after you have entered the code, you may be too far away from the component or at a wrong angle. This remote uses IR (infrared) technology to communicate with components. The remote sends the code, and the component’s IR sensor reads the code. Therefore, there must be an unobstructed path between the remote and the IR sensor on the component. Move closer and make sure you point the remote at the component (VCR or DVD player when programming the VCR•DVD key; TV when programming the TV key; cable box or satellite receiver when you’re programming the SAT•CBL key).

•If you’ve used the Direct Entry programming methods to enter the codes for your brand and the unit is still not functioning properly, try one of the Code Search methods. (See Code Search Methods on pages 7 and 9.)

•To control combo TV/VCR or TV/DVD units, you must program both the TV key and the VCR•DVD key. Once programmed successfully, the TV key controls the TV

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents I V E R S a L Table of Contents Backlighting Battery Installation InformationBattery Saver Programming Methods Illuminated Onoff KeyProgramming the Remote Brand Code Search and EntryTV, VCRDVD, Satcbl you Direct Code Entry Manual Code Search and Entry Testing the Code for Maximum Functionality Auto Code Search and Entry Onoff Vcrdvd Code Retrieval Using the Remote to Control Your Components Exiting a Menu Mode Sleep Timer Select Models OnlyAccessing and Selecting Menu Items On-screen MenusTroubleshooting Problem The remote is not performing commands properly Table des matières DROITE, GaucheRétroéclairage Installation des piles et informationÉconomiseur de piles Méthodes de programmation Programmation de la télécommandeTouche Onoff éclairée Recherche et entrée de code de marqueOnoff c. Relâchez la touche VCRDVD. La Méthodes de programmation suite Entrée directe de codeRecherche et entrée de code manuelles Maintenez la touche Vcrdvd Tester le code pour La fonctionnalité maximale Recherche et entrée de code automatiqueGO Back Vcrdvd Onoff Onoff . La touche Onoff Récupération de code ONOFF. La touche OnoffAccès et sélection d’éléments de menu Utilisation de la télécommande avec vos appareilsMenus à l’écran Minuterie-sommeil certains modèles seulement Quitter un mode MenuMenus à l’écran suite Dépannage Annulation DE LA MINUTERIE-SOMMEILDépannage suite RCR311SNAIBREVBK4.qxd 7/27/04 1142 AM Índice GarantíaIluminación del teclado Instalación de las pilas e informaciónInterruptor economizador de pilas Métodos de programación Tecla Onoff iluminadaCómo programar el control remoto Búsqueda y registro de códigos de marcasTV , Vcrdvd , Satcbl que Métodos de programación continúa Registro directo de códigosMétodo manual de búsqueda y registro de códigos Consejo Para salir en cualquier Prueba del código para la funcionalidad máxima Método automático de búsqueda y registro de códigosMomento de la búsqueda automática de Onoff Play Parpadee Reverse Onoff Forward Stop Recuperación de códigos Menús en pantalla Cómo tener acceso al menú y seleccionar las categoríasCómo salir del menú Menús en pantalla continúaApagado programado en algunos modelos solamente Detección y solución de problemas Detección y solución De problemas continúa Warranty/Garantie/Garantía Limited Lifetime Warranty79000

RCR311S specifications

The RCA RCR311S is a versatile and user-friendly universal remote control that serves as a convenient solution for managing multiple electronic devices within your home. With the increasing number of gadgets in modern households, the need for a consolidated remote control has never been more vital. The RCA RCR311S meets this need by allowing users to control up to three devices simultaneously, including televisions, DVD players, cable boxes, and more.

One of the standout features of the RCA RCR311S is its intuitive design. The remote is equipped with an easy-to-read button layout, making it accessible for users of all ages. The prominent device selection buttons help streamline the usage process, ensuring that users can switch between devices without fumbling through complex menus. Its lightweight yet durable construction adds to its appeal, ensuring that it can withstand the rigors of daily use.

The RCA RCR311S utilizes advanced infrared technology to transmit commands effectively to a wide range of devices. This allows for reliable communication between the remote and the devices, ensuring quick response times and seamless operation. The remote is designed to be compatible with most major brands and models, making it an ideal choice for nearly any household.

Another notable characteristic of the RCA RCR311S is its simplicity in setup and programming. Users can easily program the remote to control their devices by following straightforward on-screen prompts or using the code search feature. The remote comes preloaded with a vast array of codes, ensuring that users can quickly find the correct one for their specific devices. Additionally, a dedicated help button assists users in troubleshooting any issues that may arise during setup.

Furthermore, the RCA RCR311S incorporates energy-saving features, such as an automatic shut-off function that conserves battery life when the remote is not in use. This extends the lifespan of the batteries, reducing the need for frequent replacements and making it a more eco-friendly option.

Overall, the RCA RCR311S stands out as a reliable and efficient universal remote control. Its combination of user-friendly design, robust compatibility, and straightforward programming makes it a practical choice for anyone looking to simplify their entertainment experience. Whether you're a tech-savvy user or a beginner, the RCA RCR311S promises to enhance your control over your home entertainment setup.
Top Page Image Contents