RCR311S_NA_IB_REVB_K4.qxd 7/27/04 11:41 AM Page 6
Programming Methods (continued)
STOP
ON•OFF
11.Once you have found the correct code, you must save that code by pressing and releasing the STOP key. The illuminated ON•OFF key turns off. You must press the
STOP key to save the code or the correct code will not be stored!
12.To confirm that the component key is programmed with the correct code for maximum functionality, test the component. Attempt to control a variety of the component’s functions with the remote. If some of the features of your component do not work, try programming the remote using the direct code entry method.
Direct Code Entry
To program your universal remote to control your components using the Direct Code Entry Method, follow the steps below.
VCR•DVD
TV SAT•CBL
ON•OFF
(BLINK)
ON•OFF
ON•OFF
(BLINK)
1.Manually turn on the component you want the remote to control.
2.Locate the enclosed Code Lists. Find the list for the component you wish to program. Find your component’s brand. You will see a listing of
3.Press and hold the component key (TV, VCR•DVD, SAT•CBL) you wishto program. The illuminated ON•OFF key turns on and remains on. If you release the component key at any time during the Direct Code Entry procedure, the illuminated ON•OFF key blinks four times, and the process is exited.
4.While holding down the component key, consult the Code Lists for the
5.After the fourth number is entered, the illuminated ON•OFF key turns on. At this time, release the component key. If the illuminated ON•OFF key turns off, you have entered a valid code and have followed the correct procedure for Direct Code Entry.
If you enter a code number that is not in the Code Lists or you do not follow all of the steps for Direct Code Entry, the illuminated ON•OFF key blinks four times when the component key is released. This is an indication that a programming error has occurred. In that case, repeat the Direct Code Entry process from step 3.
6