Programming For DVD, Retrieving Codes, DVD Code List

RCU300 Manual 12/11/01 11:51 AM Page 10

Programming For DVD

Follow same instructions for programming VCR but use DVD code list.

DVD CODE

Retrieving Codes

If you need to find the three-digit code for your TV, VCR, DBS, DVD or Cable Box after your device is set-up using Code Search, use this procedure.

The DVD codes are programmed using the VCR/DVD key.

1. Press and hold CODE SEARCH

until the INDICATOR LIGHT

lights, then release CODE

SEARCH.

CODE INDICATOR SEARCH LIGHT

DVD Code List

Aiwa	350
Hitachi	351
JVC	161, 352
Konka	353, 354
Magnavox	162, 356, 357
Mitsubishi	163
Panasonic	355
Philips	162, 356, 357
Pioneer	165
ProScan	160

RCA	160
Sanyo	359
Sony	166, 360, 361
Toshiba	167, 362, 363
Zenith	364

2.	Press and release the device
	button for the device’s code
	you are retrieving (TV,
	VCR/DVD, or DBS/CABLE).
	The INDICATOR LIGHT will
	blink once then remain lit.
3.	Press and release CODE

DBS/ VCR/

CABLE DVD TV

(BLINK)

Programming With Code Search

If your TV, VCR, DVD, or Cable Box does not respond after you have tried all the codes for your brand, or if your brand is not listed, try searching for your code by following the steps below.

SEARCH. The INDICATOR

LIGHT will turn off.

4. Starting with 0 on the keypad,

press the number buttons in

order (0-9) until the

CODE

(OFF)

(BLINK)

0 9

1.	Turn on the device you wish
	to program.
2.	Press and hold CODE SEARCH

CODE

INDICATOR

INDICATOR LIGHT blinks.

5. The number which causes the

INDICATOR LIGHT to blink is

…

until the INDICATOR LIGHT

lights, then release CODE

SEARCH.

3. Press and release the device

button for the device you are

programming (TV, VCR/DVD or

DBS/CABLE). The INDICATOR

LIGHT will blink once then

remain lit.

4. Press and release OFF/ON until

your device turns off.

Important: You may have to press OFF/ON up to 200 times.

5.When your device turns off, press the ENTER button, the

INDICATOR LIGHT will go off.

SEARCH LIGHT

DBS/ VCR/

CABLE DVD TV

(BLINK)

OFF/ON

ENTER

(OFF)

the first digit of your code.

6. Repeat step 4 until you have

retrieved all three numbers in

the code.